Re: [PATCH] arm64: dts: qcom: thinkpad-x13s: Update firmware location

From: Bjorn Andersson
Date: Tue Sep 13 2022 - 16:13:46 EST


On Tue, Sep 13, 2022 at 04:27:34PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Sep 13, 2022 at 12:07:32PM +0200, Johan Hovold wrote:
> > [ Resend with Bjorn's address updated as the Linaro one now bounces. ]
> >
> > On Tue, Sep 13, 2022 at 11:10:30AM +0530, Manivannan Sadhasivam wrote:
> > > The firmware location in linux-firmware has been changed to include the
> > > SoC name. So use the updated location in Thinkpad devicetree.
> > >
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > I guess we should pick a commit prefix that we stick to for changes to
> > this driver.
> >
> > arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s:
> >
> > is arguably unnecessarily long even if it follows the pattern of some
> > other qcom dts.
> >
> > Shall we just use
> >
> > arm64: dts: qcom: sc8280xp-x13s:
>
> This looks looks better. I did look into the earlier commits but I found
> the prefix to be too long, so went with the last commit prefix.
>

+1

> >
> > which matches sc8280xp-crd? Or stick "lenovo" in there as well? Or just
> > keep the whole thing unchanged?
> >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > > index c379650e52b1..3b7943d6e164 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > > @@ -554,13 +554,13 @@ keyboard@68 {
> > > };
> > >
> > > &remoteproc_adsp {
> > > - firmware-name = "qcom/LENOVO/21BX/qcadsp8280.mbn";
> > > + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
> > >
> > > status = "okay";
> > > };
> > >
> > > &remoteproc_nsp0 {
> > > - firmware-name = "qcom/LENOVO/21BX/qccdsp8280.mbn";
> > > + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
> > >
> > > status = "okay";
> > > };
> >
> > Change itself looks good otherwise:
> >
> > Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> >
>
> Thanks! I will respin with the agreed prefix.
>
> Regards,
> Mani
>
> > Johan