[PATCH 2/4] media: sun8i-a83t-mipi-csi2: Require both pads to be connected for streaming

[Paul Kocialkowski]

The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.

Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
 .../sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c       | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
index b032ec13a683..5e1c25db7bc4 100644
--- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
+++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
@@ -557,8 +557,10 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
 
 	/* Media Pads */
 
-	pads[SUN8I_A83T_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
-	pads[SUN8I_A83T_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+	pads[SUN8I_A83T_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK |
+						    MEDIA_PAD_FL_MUST_CONNECT;
+	pads[SUN8I_A83T_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE |
+						      MEDIA_PAD_FL_MUST_CONNECT;
 
 	ret = media_entity_pads_init(&subdev->entity,
 				     SUN8I_A83T_MIPI_CSI2_PAD_COUNT, pads);
-- 
2.37.3