Re: [PATCH v2] hwmon: (gpio-fan) Fix array out of bounds access

From: Guenter Roeck
Date: Tue Aug 30 2022 - 00:28:42 EST


On Tue, Aug 30, 2022 at 03:11:01AM +0200, Armin Wolf wrote:
> The driver does not check if the cooling state passed to
> gpio_fan_set_cur_state() exceeds the maximum cooling state as
> stored in fan_data->num_speeds. Since the cooling state is later
> used as an array index in set_fan_speed(), an array out of bounds
> access can occur.
> This can be exploited by setting the state of the thermal cooling device
> to arbitrary values, causing for example a kernel oops when unavailable
> memory is accessed this way.
>
> Example kernel oops:
> [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
> [ 807.987369] Mem abort info:
> [ 807.987398] ESR = 0x96000005
> [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 807.987477] SET = 0, FnV = 0
> [ 807.987507] EA = 0, S1PTW = 0
> [ 807.987536] FSC = 0x05: level 1 translation fault
> [ 807.987570] Data abort info:
> [ 807.987763] ISV = 0, ISS = 0x00000005
> [ 807.987801] CM = 0, WnR = 0
> [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
> [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
> [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
> [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
> [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575
> [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
> [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
> [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
> [ 807.988691] sp : ffffffc008cf3bd0
> [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
> [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
> [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
> [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
> [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
> [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
> [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
> [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
> [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
> [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
> [ 807.989084] Call trace:
> [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan]
> [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
> [ 807.989199] cur_state_store+0x84/0xd0
> [ 807.989221] dev_attr_store+0x20/0x38
> [ 807.989262] sysfs_kf_write+0x4c/0x60
> [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0
> [ 807.989298] new_sync_write+0x10c/0x190
> [ 807.989315] vfs_write+0x254/0x378
> [ 807.989362] ksys_write+0x70/0xf8
> [ 807.989379] __arm64_sys_write+0x24/0x30
> [ 807.989424] invoke_syscall+0x4c/0x110
> [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120
> [ 807.989458] do_el0_svc+0x2c/0x90
> [ 807.989473] el0_svc+0x24/0x60
> [ 807.989544] el0t_64_sync_handler+0x90/0xb8
> [ 807.989558] el0t_64_sync+0x1a0/0x1a4
> [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
> [ 807.989627] ---[ end trace 8ded4c918658445b ]---
>
> Fix this by checking the cooling state and return an error if it
> exceeds the maximum cooling state.
>
> Tested on a Raspberry Pi 3.
>
> Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
> Signed-off-by: Armin Wolf <W_Armin@xxxxxx>

Applied.

Thanks,
Guenter

> ---
> Changes in v2:
> - move check to gpio_fan_set_cur_state()
> - reword commit message
> ---
> drivers/hwmon/gpio-fan.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> --
> 2.30.2
>
> diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
> index befe989ca7b9..fbf3f5a4ecb6 100644
> --- a/drivers/hwmon/gpio-fan.c
> +++ b/drivers/hwmon/gpio-fan.c
> @@ -391,6 +391,9 @@ static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev,
> if (!fan_data)
> return -EINVAL;
>
> + if (state >= fan_data->num_speed)
> + return -EINVAL;
> +
> set_fan_speed(fan_data, state);
> return 0;
> }