[PATCH 4.19 113/287] clk: renesas: r9a06g032: Fix UART clkgrp bitsel

[Greg Kroah-Hartman]

From: Ralph Siemsen <ralph.siemsen@xxxxxxxxxx>

[ Upstream commit 2dee50ab9e72a3cae75b65e5934c8dd3e9bf01bc ]

There are two UART clock groups, each having a mux to select its
upstream clock source. The register/bit definitions for accessing these
two muxes appear to have been reversed since introduction. Correct them
so as to match the hardware manual.

Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver")

Signed-off-by: Ralph Siemsen <ralph.siemsen@xxxxxxxxxx>
Reviewed-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@xxxxxxxxxx
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/clk/renesas/r9a06g032-clocks.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index 6e03b467395b..ec48b5516e17 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -277,8 +277,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
 		.name = "uart_group_012",
 		.type = K_BITSEL,
 		.source = 1 + R9A06G032_DIV_UART,
-		/* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
-		.dual.sel = ((0xec / 4) << 5) | 24,
+		/* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
+		.dual.sel = ((0x34 / 4) << 5) | 30,
 		.dual.group = 0,
 	},
 	{
@@ -286,8 +286,8 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
 		.name = "uart_group_34567",
 		.type = K_BITSEL,
 		.source = 1 + R9A06G032_DIV_P2_PG,
-		/* R9A06G032_SYSCTRL_REG_PWRCTRL_PG0_0 */
-		.dual.sel = ((0x34 / 4) << 5) | 30,
+		/* R9A06G032_SYSCTRL_REG_PWRCTRL_PG1_PR2 */
+		.dual.sel = ((0xec / 4) << 5) | 24,
 		.dual.group = 1,
 	},
 	D_UGATE(CLK_UART0, "clk_uart0", UART_GROUP_012, 0, 0, 0x1b2, 0x1b3, 0x1b4, 0x1b5),
-- 
2.35.1