[PATCH 1/4] net: mediatek: sgmii: fix powering up the SGMII phy

[Alexander Couzens]

There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.

Signed-off-by: Alexander Couzens <lynxis@xxxxxxx>
---
 drivers/net/ethernet/mediatek/mtk_sgmii.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 736839c84130..a01bb20ea957 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -36,9 +36,7 @@ static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
 	val |= SGMII_AN_RESTART;
 	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
 
-	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-	val &= ~SGMII_PHYA_PWD;
-	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
 
 	return 0;
 
@@ -70,9 +68,7 @@ static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
 
 	/* Release PHYA power down state */
-	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-	val &= ~SGMII_PHYA_PWD;
-	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
 
 	return 0;
 }
-- 
2.35.1