[PATCH 5.10 237/545] can: sja1000: do not report txerr and rxerr during bus-off

From: Greg Kroah-Hartman
Date: Fri Aug 19 2022 - 12:14:08 EST


From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>

[ Upstream commit 164d7cb2d5a30f1b3a5ab4fab1a27731fb1494a8 ]

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 215db1856e83 ("can: sja1000: Consolidate and unify state change handling")
Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@xxxxxxxxxx
Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/can/sja1000/sja1000.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 25a4d7d0b349..ee34baeb2afe 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -405,9 +405,6 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
txerr = priv->read_reg(priv, SJA1000_TXERR);
rxerr = priv->read_reg(priv, SJA1000_RXERR);

- cf->data[6] = txerr;
- cf->data[7] = rxerr;
-
if (isrc & IRQ_DOI) {
/* data overrun interrupt */
netdev_dbg(dev, "data overrun interrupt\n");
@@ -429,6 +426,10 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
else
state = CAN_STATE_ERROR_ACTIVE;
}
+ if (state != CAN_STATE_BUS_OFF) {
+ cf->data[6] = txerr;
+ cf->data[7] = rxerr;
+ }
if (isrc & IRQ_BEI) {
/* bus error interrupt */
priv->can.can_stats.bus_error++;
--
2.35.1