Re: [PATCH v1 05/35] drm/connector: Add TV standard property

From: Noralf Trønnes
Date: Wed Aug 17 2022 - 19:24:07 EST




Den 17.08.2022 15.11, skrev Noralf Trønnes:
>
>
> Den 17.08.2022 13.46, skrev Maxime Ripard:
>> On Tue, Aug 16, 2022 at 09:35:24PM +0200, Noralf Trønnes wrote:
>>> Den 16.08.2022 11.49, skrev Maxime Ripard:
>>>> On Tue, Aug 16, 2022 at 11:42:20AM +0200, Noralf Trønnes wrote:
>>>>> Den 16.08.2022 10.26, skrev Maxime Ripard:
>>>>>> Hi,
>>>>>>
>>>>>> On Mon, Aug 08, 2022 at 02:44:56PM +0200, Noralf Trønnes wrote:
>>>>>>> Den 29.07.2022 18.34, skrev Maxime Ripard:
>>>>>>>> The TV mode property has been around for a while now to select and get the
>>>>>>>> current TV mode output on an analog TV connector.
>>>>>>>>
>>>>>>>> Despite that property name being generic, its content isn't and has been
>>>>>>>> driver-specific which makes it hard to build any generic behaviour on top
>>>>>>>> of it, both in kernel and user-space.
>>>>>>>>
>>>>>>>> Let's create a new bitmask tv norm property, that can contain any of the
>>>>>>>> analog TV standards currently supported by kernel drivers. Each driver can
>>>>>>>> then pass in a bitmask of the modes it supports.
>>>>>>>>
>>>>>>>> We'll then be able to phase out the older tv mode property.
>>>>>>>>
>>>>>>>> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
>>>>>>>>

>>> How do you test the property? I've used modetest but I can only change
>>> to a tv.mode that matches the current display mode. I can't switch from
>>> ntsc to pal for instance.
>>
>> Yep, if you want to change from PAL to NTSC, it will require a new mode.
>>
>
> So userspace has to check tv.mode first and then create a display mode
> the driver will accept if switching to a different display mode is
> necessary? In other words, userspace can't discover from the kernel
> which display modes a certain tv.mode/norm provides before it is
> selected? If so, maybe libdrm should have some function(s) to deal with
> switching between modes that require a different display mode since
> knowledge about which display modes a tv.mode supports is needed before
> hand.
>

I haven't used vc4 on Pi4 in mainline before and have finally gotten it
to work.

I see that the connector reports 2 modes that together fit all tv.norms
so userspace doesn't have to contruct a display mode, but it does need
to know which display mode belongs to a certain tv.norm.

When I try to use modetest I'm unable to set a mode:

pi@pi4t:~ $ modetest -M vc4 -s 45:720x480i
setting mode 720x480i-29.97Hz on connectors 45, crtc 68
failed to set mode: Function not implemented

The errno is misleading, modetest does a drmModeDirtyFB before checking
the error returned by drmModeSetCrtc.

Setting the property succeeds, but the modeset still fails:

pi@pi4t:~ $ modetest -M vc4 -s 45:720x480i -w 45:"tv norm":2
setting mode 720x480i-29.97Hz on connectors 45, crtc 68
failed to set mode: Function not implemented

pi@pi4t:~ $ modetest -M vc4 -c
37 tv norm:
flags: bitmask
values: NTSC-443=0x1 NTSC-J=0x2 NTSC-M=0x4 PAL-B=0x10
PAL-M=0x200 PAL-N=0x400 SECAM-B=0x2000
value: 2

Here's the log, can you see if there's anything obvious in there:
https://gist.github.com/notro/a079498bf6b64327105752b2bafa8858

Noralf.