Re: [PATCH v3 2/4] regulator: sun20i: Add support for Allwinner D1 LDOs

From: Heiko Stübner
Date: Wed Aug 17 2022 - 06:01:48 EST


Am Mittwoch, 17. August 2022, 10:28:40 CEST schrieb Samuel Holland:
> On 8/15/22 12:00 PM, Heiko Stübner wrote:
> > Am Montag, 15. August 2022, 06:34:33 CEST schrieb Samuel Holland:
> >> D1 contains two pairs of LDOs. Since they have similar bindings, and
> >> they always exist together, put them in a single driver.
> >>
> >> The analog LDOs are relatively boring, with a single linear range. Their
> >> one quirk is that a bandgap reference must be calibrated for them to
> >> produce the correct voltage.
> >>
> >> The system LDOs have the complication that their voltage step is not an
> >> integer, so a custom .list_voltage is needed to get the rounding right.
> >>
> >> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> >> ---
> >>
> >> Changes in v3:
> >> - Adjust control flow in sun20i_regulator_get_regmap() for clarity
> >>
> >> Changes in v2:
> >> - Use decimal numbers for .n_voltages instead of field widths
> >> - Get the regmap from the parent device instead of a property/phandle
> >>
> >> drivers/regulator/Kconfig | 8 +
> >> drivers/regulator/Makefile | 1 +
> >> drivers/regulator/sun20i-regulator.c | 232 +++++++++++++++++++++++++++
> >> 3 files changed, 241 insertions(+)
> >> create mode 100644 drivers/regulator/sun20i-regulator.c
> >>
> >> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> >> index 23e3e4a35cc9..0c5727173fa0 100644
> >> --- a/drivers/regulator/Kconfig
> >> +++ b/drivers/regulator/Kconfig
> >> @@ -1262,6 +1262,14 @@ config REGULATOR_STW481X_VMMC
> >> This driver supports the internal VMMC regulator in the STw481x
> >> PMIC chips.
> >>
> >> +config REGULATOR_SUN20I
> >> + tristate "Allwinner D1 internal LDOs"
> >> + depends on ARCH_SUNXI || COMPILE_TEST
> >> + depends on MFD_SYSCON && NVMEM
> >> + default ARCH_SUNXI
> >> + help
> >> + This driver supports the internal LDOs in the Allwinner D1 SoC.
> >> +
> >> config REGULATOR_SY7636A
> >> tristate "Silergy SY7636A voltage regulator"
> >> help
> >> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> >> index fa49bb6cc544..5dff112eb015 100644
> >> --- a/drivers/regulator/Makefile
> >> +++ b/drivers/regulator/Makefile
> >> @@ -148,6 +148,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
> >> obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
> >> obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
> >> obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
> >> +obj-$(CONFIG_REGULATOR_SUN20I) += sun20i-regulator.o
> >> obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o
> >> obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
> >> obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
> >> diff --git a/drivers/regulator/sun20i-regulator.c b/drivers/regulator/sun20i-regulator.c
> >> new file mode 100644
> >> index 000000000000..46f3927d7d10
> >> --- /dev/null
> >> +++ b/drivers/regulator/sun20i-regulator.c
> >> @@ -0,0 +1,232 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +//
> >> +// Copyright (c) 2021-2022 Samuel Holland <samuel@xxxxxxxxxxxx>
> >> +//
> >
> > nit: shouldn't the comment look like
> > /*
> > * Copyright (c) 2021-2022 Samuel Holland <samuel@xxxxxxxxxxxx>
> > */
>
> I have had multiple requests from maintainers to use the former style because it
> is more visually consistent. `git grep '^// Copy' drivers sound` returns over
> 1500 hits. But it doesn't really matter to me.

ok ... I guess that is something that's changing then :-)

I just looked into some drivers and the coding-style rst document, but I
guess it's the maintainer's call how this should look.