[PATCH v1 6/7] i2c-mlxbf.c: support BlueField-3 SoC

From: Asmaa Mnebhi
Date: Tue Aug 16 2022 - 19:01:50 EST


BlueField-3 SoC has the same I2C IP logic as previous
BlueField-1 and 2 SoCs but it has different registers' addresses.
This is an effort to keep this driver generic accross all
BlueField generations.
This patch breaks down the "smbus" resource into 3 separate
resources to enable us to use common registers' offsets for all
BlueField SoCs:
struct mlxbf_i2c_resource *timer;
struct mlxbf_i2c_resource *mst;
struct mlxbf_i2c_resource *slv;

Of course, all offsets had to be adjusted accordingly, and we took
this chance to reorganize the macros depending on the register block
they target.

There are only 2 registers' offsets that do not fit within this
schema so their offsets are passed as SoC-specific parameters:
smbus_master_rs_bytes_off
smbus_master_fsm_off

Reviewed-by: Khalil Blaiech <kblaiech@xxxxxxxxxx>
Signed-off-by: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
---
.../bindings/i2c/mellanox,i2c-mlxbf.yaml | 30 +-
MAINTAINERS | 1 +
drivers/i2c/busses/i2c-mlxbf.c | 397 ++++++++++--------
3 files changed, 258 insertions(+), 170 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
index 93198d5d43a6..cb3a012914e0 100644
--- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
+++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
@@ -8,6 +8,7 @@ title: Mellanox I2C SMBus on BlueField SoCs

maintainers:
- Khalil Blaiech <kblaiech@xxxxxxxxxx>
+ - Asmaa Mnebhi <asmaa@xxxxxxxxxx>

allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
@@ -17,11 +18,15 @@ properties:
enum:
- mellanox,i2c-mlxbf1
- mellanox,i2c-mlxbf2
+ - mellanox,i2c-mlxbf3

reg:
- minItems: 3
+ minItems: 5
+ maxItems: 6
items:
- - description: Smbus block registers
+ - description: Smbus timer registers
+ - description: Smbus master registers
+ - description: Smbus slave registers
- description: Cause master registers
- description: Cause slave registers
- description: Cause coalesce registers
@@ -58,7 +63,9 @@ examples:
- |
i2c@2804000 {
compatible = "mellanox,i2c-mlxbf1";
- reg = <0x02804000 0x800>,
+ reg = <0x02804000 0x40>,
+ <0x02804200 0x200>,
+ <0x02804400 0x200>,
<0x02801200 0x020>,
<0x02801260 0x020>;
interrupts = <57>;
@@ -68,10 +75,25 @@ examples:
- |
i2c@2808800 {
compatible = "mellanox,i2c-mlxbf2";
- reg = <0x02808800 0x600>,
+ reg = <0x02808800 0x40>,
+ <0x02808a00 0x200>,
+ <0x02808c00 0x200>,
<0x02808e00 0x020>,
<0x02808e20 0x020>,
<0x02808e40 0x010>;
interrupts = <57>;
clock-frequency = <400000>;
};
+
+ - |
+ i2c@2808800 {
+ compatible = "mellanox,i2c-mlxbf3";
+ reg = <0x13404480 0x40>,
+ <0x13404200 0x200>,
+ <0x13404000 0x200>,
+ <0x13404400 0x020>,
+ <0x13404420 0x020>,
+ <0x13404440 0x010>;
+ interrupts = <35>;
+ clock-frequency = <400000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index f512b430c7cb..9f03c945bedd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12978,6 +12978,7 @@ F: drivers/input/touchscreen/melfas_mip4.c

MELLANOX BLUEFIELD I2C DRIVER
M: Khalil Blaiech <kblaiech@xxxxxxxxxx>
+M: Asmaa Mnebhi <asmaa@xxxxxxxxxx>
L: linux-i2c@xxxxxxxxxxxxxxx
S: Supported
F: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
index c6959ba7113e..cc87c2511678 100644
--- a/drivers/i2c/busses/i2c-mlxbf.c
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -28,8 +28,6 @@
(MLXBF_I2C_FUNC_SMBUS_DEFAULT | MLXBF_I2C_FUNC_SMBUS_BLOCK | \
I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SLAVE)

-#define MLXBF_I2C_SMBUS_MAX 3
-
/* Shared resources info in BlueField platforms. */

#define MLXBF_I2C_COALESCE_TYU_ADDR 0x02801300
@@ -44,6 +42,9 @@
#define MLXBF_I2C_COREPLL_YU_ADDR 0x02800c30
#define MLXBF_I2C_COREPLL_YU_SIZE 0x00c

+#define MLXBF_I2C_COREPLL_RSH_YU_ADDR 0x13409824
+#define MLXBF_I2C_COREPLL_RSH_YU_SIZE 0x00c
+
#define MLXBF_I2C_SHARED_RES_MAX 3

/*
@@ -127,14 +128,10 @@
/* Slave busy bit reset. */
#define MLXBF_I2C_CAUSE_S_GW_BUSY_FALL BIT(18)

-#define MLXBF_I2C_CAUSE_SLAVE_ARBITER_BITS_MASK GENMASK(20, 0)
-
/* Cause coalesce registers. */
#define MLXBF_I2C_CAUSE_COALESCE_0 0x00
-#define MLXBF_I2C_CAUSE_COALESCE_1 0x04
-#define MLXBF_I2C_CAUSE_COALESCE_2 0x08

-#define MLXBF_I2C_CAUSE_TYU_SLAVE_BIT MLXBF_I2C_SMBUS_MAX
+#define MLXBF_I2C_CAUSE_TYU_SLAVE_BIT 3
#define MLXBF_I2C_CAUSE_YU_SLAVE_BIT 1

/* Functional enable register. */
@@ -161,15 +158,6 @@
#define MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(num, val) \
((val) | (0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num)))

-/* SMBus timing parameters. */
-#define MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH 0x00
-#define MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE 0x04
-#define MLXBF_I2C_SMBUS_TIMER_THOLD 0x08
-#define MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP 0x0c
-#define MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA 0x10
-#define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF 0x14
-#define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT 0x18
-
/*
* Defines SMBus operating frequency and core clock frequency.
* According to ADB files, default values are compliant to 100KHz SMBus
@@ -188,26 +176,35 @@
#define MLXBF_I2C_COREPLL_CORE_OD_YU_MASK GENMASK(3, 0)
#define MLXBF_I2C_COREPLL_CORE_R_YU_MASK GENMASK(31, 26)

+/* SMBus timing parameters. */
+#define MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH 0x00
+#define MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE 0x04
+#define MLXBF_I2C_SMBUS_TIMER_THOLD 0x08
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP 0x0c
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA 0x10
+#define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF 0x14
+#define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT 0x18

-/* Core PLL frequency. */
-static u64 mlxbf_i2c_corepll_frequency;
+#define MLXBF_I2C_SHIFT_0 0
+#define MLXBF_I2C_SHIFT_8 8
+#define MLXBF_I2C_SHIFT_16 16
+#define MLXBF_I2C_SHIFT_24 24
+
+#define MLXBF_I2C_MASK_8 GENMASK(7, 0)
+#define MLXBF_I2C_MASK_16 GENMASK(15, 0)

/* SMBus Master GW. */
-#define MLXBF_I2C_SMBUS_MASTER_GW 0x200
+#define MLXBF_I2C_SMBUS_MASTER_GW 0x0
/* Number of bytes received and sent. */
-#define MLXBF_I2C_SMBUS_RS_BYTES 0x300
+#define MLXBF_I2C_YU_SMBUS_RS_BYTES 0x100
+#define MLXBF_I2C_RSH_YU_SMBUS_RS_BYTES 0x10c
/* Packet error check (PEC) value. */
-#define MLXBF_I2C_SMBUS_MASTER_PEC 0x304
+#define MLXBF_I2C_SMBUS_MASTER_PEC 0x104
/* Status bits (ACK/NACK/FW Timeout). */
-#define MLXBF_I2C_SMBUS_MASTER_STATUS 0x308
+#define MLXBF_I2C_SMBUS_MASTER_STATUS 0x108
/* SMbus Master Finite State Machine. */
-#define MLXBF_I2C_SMBUS_MASTER_FSM 0x310
-
-/*
- * When enabled, the master will issue a stop condition in case of
- * timeout while waiting for FW response.
- */
-#define MLXBF_I2C_SMBUS_EN_FW_TIMEOUT 0x31c
+#define MLXBF_I2C_YU_SMBUS_MASTER_FSM 0x110
+#define MLXBF_I2C_RSH_YU_SMBUS_MASTER_FSM 0x100

/* SMBus master GW control bits offset in MLXBF_I2C_SMBUS_MASTER_GW[31:3]. */
#define MLXBF_I2C_MASTER_LOCK_BIT BIT(31) /* Lock bit. */
@@ -227,14 +224,14 @@ static u64 mlxbf_i2c_corepll_frequency;
#define MLXBF_I2C_MASTER_ENABLE_READ \
(MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_READ_BIT)

-#define MLXBF_I2C_MASTER_SLV_ADDR_SHIFT 12 /* Slave address shift. */
-#define MLXBF_I2C_MASTER_WRITE_SHIFT 21 /* Control write bytes shift. */
-#define MLXBF_I2C_MASTER_SEND_PEC_SHIFT 20 /* Send PEC byte shift. */
-#define MLXBF_I2C_MASTER_PARSE_EXP_SHIFT 11 /* Parse expected bytes shift. */
-#define MLXBF_I2C_MASTER_READ_SHIFT 4 /* Control read bytes shift. */
+#define MLXBF_I2C_MASTER_WRITE_SHIFT 21 /* Control write bytes */
+#define MLXBF_I2C_MASTER_SEND_PEC_SHIFT 20 /* Send PEC byte when set to 1 */
+#define MLXBF_I2C_MASTER_PARSE_EXP_SHIFT 11 /* Control parse expected bytes */
+#define MLXBF_I2C_MASTER_SLV_ADDR_SHIFT 12 /* Slave address */
+#define MLXBF_I2C_MASTER_READ_SHIFT 4 /* Control read bytes */

/* SMBus master GW Data descriptor. */
-#define MLXBF_I2C_MASTER_DATA_DESC_ADDR 0x280
+#define MLXBF_I2C_MASTER_DATA_DESC_ADDR 0x80
#define MLXBF_I2C_MASTER_DATA_DESC_SIZE 0x80 /* Size in bytes. */

/* Maximum bytes to read/write per SMBus transaction. */
@@ -261,18 +258,18 @@ static u64 mlxbf_i2c_corepll_frequency;
#define MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK BIT(15)

/* SMBus slave GW. */
-#define MLXBF_I2C_SMBUS_SLAVE_GW 0x400
+#define MLXBF_I2C_SMBUS_SLAVE_GW 0x0
/* Number of bytes received and sent from/to master. */
-#define MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES 0x500
+#define MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES 0x100
/* Packet error check (PEC) value. */
-#define MLXBF_I2C_SMBUS_SLAVE_PEC 0x504
+#define MLXBF_I2C_SMBUS_SLAVE_PEC 0x104
/* SMBus slave Finite State Machine (FSM). */
-#define MLXBF_I2C_SMBUS_SLAVE_FSM 0x510
+#define MLXBF_I2C_SMBUS_SLAVE_FSM 0x110
/*
* Should be set when all raised causes handled, and cleared by HW on
* every new cause.
*/
-#define MLXBF_I2C_SMBUS_SLAVE_READY 0x52c
+#define MLXBF_I2C_SMBUS_SLAVE_READY 0x12c

/* SMBus slave GW control bits offset in MLXBF_I2C_SMBUS_SLAVE_GW[31:19]. */
#define MLXBF_I2C_SLAVE_BUSY_BIT BIT(30) /* Busy bit. */
@@ -285,13 +282,13 @@ static u64 mlxbf_i2c_corepll_frequency;
#define MLXBF_I2C_SLAVE_SEND_PEC_SHIFT 21 /* Send PEC byte shift. */

/* SMBus slave GW Data descriptor. */
-#define MLXBF_I2C_SLAVE_DATA_DESC_ADDR 0x480
+#define MLXBF_I2C_SLAVE_DATA_DESC_ADDR 0x80
#define MLXBF_I2C_SLAVE_DATA_DESC_SIZE 0x80 /* Size in bytes. */

/* SMbus slave configuration registers. */
-#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG 0x514
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG 0x114
#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT 16
-#define MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT 7
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT BIT(7)
#define MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK GENMASK(6, 0)

/*
@@ -300,6 +297,58 @@ static u64 mlxbf_i2c_corepll_frequency;
*/
#define MLXBF_I2C_SMBUS_TIMEOUT (300 * 1000) /* 300ms */

+/* Polling frequency in microseconds. */
+#define MLXBF_I2C_POLL_FREQ_IN_USEC 200
+
+#define MLXBF_I2C_SMBUS_OP_CNT_1 1
+#define MLXBF_I2C_SMBUS_OP_CNT_2 2
+#define MLXBF_I2C_SMBUS_OP_CNT_3 3
+#define MLXBF_I2C_SMBUS_MAX_OP_CNT MLXBF_I2C_SMBUS_OP_CNT_3
+
+/* Helper macro to define an I2C resource parameters. */
+#define MLXBF_I2C_RES_PARAMS(addr, size, str) \
+ { \
+ .start = (addr), \
+ .end = (addr) + (size) - 1, \
+ .name = (str) \
+ }
+
+enum {
+ MLXBF_I2C_TIMING_100KHZ = 100000,
+ MLXBF_I2C_TIMING_400KHZ = 400000,
+ MLXBF_I2C_TIMING_1000KHZ = 1000000,
+};
+
+enum {
+ MLXBF_I2C_F_READ = BIT(0),
+ MLXBF_I2C_F_WRITE = BIT(1),
+ MLXBF_I2C_F_NORESTART = BIT(3),
+ MLXBF_I2C_F_SMBUS_OPERATION = BIT(4),
+ MLXBF_I2C_F_SMBUS_BLOCK = BIT(5),
+ MLXBF_I2C_F_SMBUS_PEC = BIT(6),
+ MLXBF_I2C_F_SMBUS_PROCESS_CALL = BIT(7),
+};
+
+/* Mellanox BlueField chip type. */
+enum mlxbf_i2c_chip_type {
+ MLXBF_I2C_CHIP_TYPE_1, /* Mellanox BlueField-1 chip. */
+ MLXBF_I2C_CHIP_TYPE_2, /* Mellanox BlueField-2 chip. */
+ MLXBF_I2C_CHIP_TYPE_3 /* Mellanox BlueField-3 chip. */
+};
+
+/* List of chip resources that are being accessed by the driver. */
+enum {
+ MLXBF_I2C_SMBUS_TIMER_RES,
+ MLXBF_I2C_SMBUS_MST_RES,
+ MLXBF_I2C_SMBUS_SLV_RES,
+ MLXBF_I2C_MST_CAUSE_RES,
+ MLXBF_I2C_SLV_CAUSE_RES,
+ MLXBF_I2C_COALESCE_RES,
+ MLXBF_I2C_COREPLL_RES,
+ MLXBF_I2C_GPIO_RES,
+ MLXBF_I2C_END_RES
+};
+
/* Encapsulates timing parameters. */
struct mlxbf_i2c_timings {
u16 scl_high; /* Clock high period. */
@@ -319,27 +368,12 @@ struct mlxbf_i2c_timings {
u32 timeout; /* Detect clock low timeout. */
};

-enum {
- MLXBF_I2C_F_READ = BIT(0),
- MLXBF_I2C_F_WRITE = BIT(1),
- MLXBF_I2C_F_NORESTART = BIT(3),
- MLXBF_I2C_F_SMBUS_OPERATION = BIT(4),
- MLXBF_I2C_F_SMBUS_BLOCK = BIT(5),
- MLXBF_I2C_F_SMBUS_PEC = BIT(6),
- MLXBF_I2C_F_SMBUS_PROCESS_CALL = BIT(7),
-};
-
struct mlxbf_i2c_smbus_operation {
u32 flags;
u32 length; /* Buffer length in bytes. */
u8 *buffer;
};

-#define MLXBF_I2C_SMBUS_OP_CNT_1 1
-#define MLXBF_I2C_SMBUS_OP_CNT_2 2
-#define MLXBF_I2C_SMBUS_OP_CNT_3 3
-#define MLXBF_I2C_SMBUS_MAX_OP_CNT MLXBF_I2C_SMBUS_OP_CNT_3
-
struct mlxbf_i2c_smbus_request {
u8 slave;
u8 operation_cnt;
@@ -353,24 +387,36 @@ struct mlxbf_i2c_resource {
u8 type;
};

-/* List of chip resources that are being accessed by the driver. */
-enum {
- MLXBF_I2C_SMBUS_RES,
- MLXBF_I2C_MST_CAUSE_RES,
- MLXBF_I2C_SLV_CAUSE_RES,
- MLXBF_I2C_COALESCE_RES,
- MLXBF_I2C_COREPLL_RES,
- MLXBF_I2C_GPIO_RES,
- MLXBF_I2C_END_RES,
+struct mlxbf_i2c_chip_info {
+ enum mlxbf_i2c_chip_type type;
+ /* Chip shared resources that are being used by the I2C controller. */
+ struct mlxbf_i2c_resource *shared_res[MLXBF_I2C_SHARED_RES_MAX];
+
+ /* Callback to calculate the core PLL frequency. */
+ u64 (*calculate_freq)(struct mlxbf_i2c_resource *corepll_res);
+
+ /* Registers' address offset */
+ u32 smbus_master_rs_bytes_off;
+ u32 smbus_master_fsm_off;
};

-/* Helper macro to define an I2C resource parameters. */
-#define MLXBF_I2C_RES_PARAMS(addr, size, str) \
- { \
- .start = (addr), \
- .end = (addr) + (size) - 1, \
- .name = (str) \
- }
+struct mlxbf_i2c_priv {
+ const struct mlxbf_i2c_chip_info *chip;
+ struct i2c_adapter adap;
+ struct mlxbf_i2c_resource *timer;
+ struct mlxbf_i2c_resource *mst;
+ struct mlxbf_i2c_resource *slv;
+ struct mlxbf_i2c_resource *mst_cause;
+ struct mlxbf_i2c_resource *slv_cause;
+ struct mlxbf_i2c_resource *coalesce;
+ u64 frequency; /* Core frequency in Hz. */
+ int bus; /* Physical bus identifier. */
+ int irq;
+ struct i2c_client *slave[MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT];
+};
+
+/* Core PLL frequency. */
+static u64 mlxbf_i2c_corepll_frequency;

static struct resource mlxbf_i2c_coalesce_tyu_params =
MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COALESCE_TYU_ADDR,
@@ -384,6 +430,10 @@ static struct resource mlxbf_i2c_corepll_yu_params =
MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_YU_ADDR,
MLXBF_I2C_COREPLL_YU_SIZE,
"COREPLL_MEM");
+static struct resource mlxbf_i2c_corepll_rsh_yu_params =
+ MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_RSH_YU_ADDR,
+ MLXBF_I2C_COREPLL_RSH_YU_SIZE,
+ "COREPLL_MEM");
static struct resource mlxbf_i2c_gpio_tyu_params =
MLXBF_I2C_RES_PARAMS(MLXBF_I2C_GPIO_TYU_ADDR,
MLXBF_I2C_GPIO_TYU_SIZE,
@@ -393,34 +443,6 @@ static struct mutex mlxbf_i2c_coalesce_lock;
static struct mutex mlxbf_i2c_corepll_lock;
static struct mutex mlxbf_i2c_gpio_lock;

-/* Mellanox BlueField chip type. */
-enum mlxbf_i2c_chip_type {
- MLXBF_I2C_CHIP_TYPE_1, /* Mellanox BlueField-1 chip. */
- MLXBF_I2C_CHIP_TYPE_2, /* Mallanox BlueField-2 chip. */
-};
-
-struct mlxbf_i2c_chip_info {
- enum mlxbf_i2c_chip_type type;
- /* Chip shared resources that are being used by the I2C controller. */
- struct mlxbf_i2c_resource *shared_res[MLXBF_I2C_SHARED_RES_MAX];
-
- /* Callback to calculate the core PLL frequency. */
- u64 (*calculate_freq)(struct mlxbf_i2c_resource *corepll_res);
-};
-
-struct mlxbf_i2c_priv {
- const struct mlxbf_i2c_chip_info *chip;
- struct i2c_adapter adap;
- struct mlxbf_i2c_resource *smbus;
- struct mlxbf_i2c_resource *mst_cause;
- struct mlxbf_i2c_resource *slv_cause;
- struct mlxbf_i2c_resource *coalesce;
- u64 frequency; /* Core frequency in Hz. */
- int bus; /* Physical bus identifier. */
- int irq;
- struct i2c_client *slave[MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT];
-};
-
static struct mlxbf_i2c_resource mlxbf_i2c_coalesce_res[] = {
[MLXBF_I2C_CHIP_TYPE_1] = {
.params = &mlxbf_i2c_coalesce_tyu_params,
@@ -440,6 +462,11 @@ static struct mlxbf_i2c_resource mlxbf_i2c_corepll_res[] = {
.params = &mlxbf_i2c_corepll_yu_params,
.lock = &mlxbf_i2c_corepll_lock,
.type = MLXBF_I2C_COREPLL_RES,
+ },
+ [MLXBF_I2C_CHIP_TYPE_3] = {
+ .params = &mlxbf_i2c_corepll_rsh_yu_params,
+ .lock = &mlxbf_i2c_corepll_lock,
+ .type = MLXBF_I2C_COREPLL_RES,
}
};

@@ -456,24 +483,13 @@ static u8 mlxbf_i2c_bus_count;

static struct mutex mlxbf_i2c_bus_lock;

-/* Polling frequency in microseconds. */
-#define MLXBF_I2C_POLL_FREQ_IN_USEC 200
-
-#define MLXBF_I2C_SHIFT_0 0
-#define MLXBF_I2C_SHIFT_8 8
-#define MLXBF_I2C_SHIFT_16 16
-#define MLXBF_I2C_SHIFT_24 24
-
-#define MLXBF_I2C_MASK_8 GENMASK(7, 0)
-#define MLXBF_I2C_MASK_16 GENMASK(15, 0)
-
/*
* Function to poll a set of bits at a specific address; it checks whether
* the bits are equal to zero when eq_zero is set to 'true', and not equal
* to zero when eq_zero is set to 'false'.
* Note that the timeout is given in microseconds.
*/
-static u32 mlxbf_smbus_poll(void __iomem *io, u32 addr, u32 mask,
+static u32 mlxbf_i2c_poll(void __iomem *io, u32 addr, u32 mask,
bool eq_zero, u32 timeout)
{
u32 bits;
@@ -495,13 +511,13 @@ static u32 mlxbf_smbus_poll(void __iomem *io, u32 addr, u32 mask,
* a transaction. Accordingly, this function polls the Master FSM stop
* bit; it returns false when the bit is asserted, true if not.
*/
-static bool mlxbf_smbus_master_wait_for_idle(struct mlxbf_i2c_priv *priv)
+static bool mlxbf_i2c_smbus_master_wait_for_idle(struct mlxbf_i2c_priv *priv)
{
u32 mask = MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK;
- u32 addr = MLXBF_I2C_SMBUS_MASTER_FSM;
+ u32 addr = priv->chip->smbus_master_fsm_off;
u32 timeout = MLXBF_I2C_SMBUS_TIMEOUT;

- if (mlxbf_smbus_poll(priv->smbus->io, addr, mask, true, timeout))
+ if (mlxbf_i2c_poll(priv->mst->io, addr, mask, true, timeout))
return true;

return false;
@@ -544,7 +560,7 @@ static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
* then read the cause and master status bits to determine if
* errors occurred during the transaction.
*/
- mlxbf_smbus_poll(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW,
+ mlxbf_i2c_poll(priv->mst->io, MLXBF_I2C_SMBUS_MASTER_GW,
MLXBF_I2C_MASTER_BUSY_BIT, true,
MLXBF_I2C_SMBUS_TIMEOUT);

@@ -557,7 +573,7 @@ static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
* Parse both Cause and Master GW bits, then return transaction status.
*/

- master_status_bits = readl(priv->smbus->io +
+ master_status_bits = readl(priv->mst->io +
MLXBF_I2C_SMBUS_MASTER_STATUS);
master_status_bits &= MLXBF_I2C_SMBUS_MASTER_STATUS_MASK;

@@ -582,7 +598,8 @@ static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
}

static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv,
- const u8 *data, u8 length, u32 addr)
+ const u8 *data, u8 length, u32 addr,
+ bool is_master)
{
u8 offset, aligned_length;
u32 data32;
@@ -599,12 +616,16 @@ static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv,
*/
for (offset = 0; offset < aligned_length; offset += sizeof(u32)) {
data32 = *((u32 *)(data + offset));
- iowrite32be(data32, priv->smbus->io + addr + offset);
+ if (is_master)
+ iowrite32be(data32, priv->mst->io + addr + offset);
+ else
+ iowrite32be(data32, priv->slv->io + addr + offset);
}
}

static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
- u8 *data, u8 length, u32 addr)
+ u8 *data, u8 length, u32 addr,
+ bool is_master)
{
u32 data32, mask;
u8 byte, offset;
@@ -620,14 +641,20 @@ static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
*/

for (offset = 0; offset < (length & ~mask); offset += sizeof(u32)) {
- data32 = ioread32be(priv->smbus->io + addr + offset);
+ if (is_master)
+ data32 = ioread32be(priv->mst->io + addr + offset);
+ else
+ data32 = ioread32be(priv->slv->io + addr + offset);
*((u32 *)(data + offset)) = data32;
}

if (!(length & mask))
return;

- data32 = ioread32be(priv->smbus->io + addr + offset);
+ if (is_master)
+ data32 = ioread32be(priv->mst->io + addr + offset);
+ else
+ data32 = ioread32be(priv->slv->io + addr + offset);

for (byte = 0; byte < (length & mask); byte++) {
data[offset + byte] = data32 & GENMASK(7, 0);
@@ -653,16 +680,16 @@ static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave,
command |= rol32(pec_en, MLXBF_I2C_MASTER_SEND_PEC_SHIFT);

/* Clear status bits. */
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_STATUS);
+ writel(0x0, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_STATUS);
/* Set the cause data. */
writel(~0x0, priv->mst_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR);
/* Zero PEC byte. */
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_PEC);
+ writel(0x0, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_PEC);
/* Zero byte count. */
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_RS_BYTES);
+ writel(0x0, priv->mst->io + priv->chip->smbus_master_rs_bytes_off);

/* GW activation. */
- writel(command, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_GW);
+ writel(command, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_GW);

/*
* Poll master status and check status bits. An ACK is sent when
@@ -699,7 +726,7 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
addr = slave << 1;

/* First of all, check whether the HW is idle. */
- if (WARN_ON(!mlxbf_smbus_master_wait_for_idle(priv)))
+ if (WARN_ON(!mlxbf_i2c_smbus_master_wait_for_idle(priv)))
return -EBUSY;

/* Set first byte. */
@@ -752,7 +779,7 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
* must be written to the data registers.
*/
mlxbf_i2c_smbus_write_data(priv, (const u8 *)data_desc, data_len,
- MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+ MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);

if (write_en) {
ret = mlxbf_i2c_smbus_enable(priv, slave, write_len, block_en,
@@ -764,13 +791,13 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
if (read_en) {
/* Write slave address to Master GW data descriptor. */
mlxbf_i2c_smbus_write_data(priv, (const u8 *)&addr, 1,
- MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+ MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);
ret = mlxbf_i2c_smbus_enable(priv, slave, read_len, block_en,
pec_en, 1);
if (!ret) {
/* Get Master GW data descriptor. */
mlxbf_i2c_smbus_read_data(priv, data_desc, read_len + 1,
- MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+ MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);

/* Get data from Master GW data descriptor. */
memcpy(read_buf, data_desc, read_len + 1);
@@ -782,7 +809,7 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
* next tag integration.
*/
writel(MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK,
- priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_FSM);
+ priv->mst->io + priv->chip->smbus_master_fsm_off);
}

return ret;
@@ -1071,7 +1098,7 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
timer |= mlxbf_i2c_set_timer(priv, timings->scl_low,
false, MLXBF_I2C_MASK_16,
MLXBF_I2C_SHIFT_16);
- writel(timer, priv->smbus->io +
+ writel(timer, priv->timer->io +
MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH);

timer = mlxbf_i2c_set_timer(priv, timings->sda_rise, false,
@@ -1082,34 +1109,34 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_16);
timer |= mlxbf_i2c_set_timer(priv, timings->scl_fall, false,
MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_24);
- writel(timer, priv->smbus->io +
+ writel(timer, priv->timer->io +
MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE);

timer = mlxbf_i2c_set_timer(priv, timings->hold_start, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
timer |= mlxbf_i2c_set_timer(priv, timings->hold_data, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
- writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_TIMER_THOLD);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_TIMER_THOLD);

timer = mlxbf_i2c_set_timer(priv, timings->setup_start, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
timer |= mlxbf_i2c_set_timer(priv, timings->setup_stop, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
- writel(timer, priv->smbus->io +
+ writel(timer, priv->timer->io +
MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP);

timer = mlxbf_i2c_set_timer(priv, timings->setup_data, true,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
- writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA);

timer = mlxbf_i2c_set_timer(priv, timings->buf, false,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
timer |= mlxbf_i2c_set_timer(priv, timings->thigh_max, false,
MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
- writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_THIGH_MAX_TBUF);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_THIGH_MAX_TBUF);

timer = timings->timeout;
- writel(timer, priv->smbus->io + MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT);
}

enum mlxbf_i2c_timings_config {
@@ -1521,7 +1548,7 @@ static int mlxbf_i2c_slave_enable(struct mlxbf_i2c_priv *priv,
* Look for the next available slave register slot.
*/
for (reg = 0; reg < reg_cnt; reg++) {
- slave_reg = readl(priv->smbus->io +
+ slave_reg = readl(priv->slv->io +
MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
/*
* Each register holds 4 slave addresses. So, we have to keep
@@ -1543,7 +1570,7 @@ static int mlxbf_i2c_slave_enable(struct mlxbf_i2c_priv *priv,
slave_reg &= ~(MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK << (byte * 8));
slave_reg |= (slave->addr << (byte * 8));
slave_reg |= MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT << (byte * 8);
- writel(slave_reg, priv->smbus->io +
+ writel(slave_reg, priv->slv->io +
MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG +
(reg * 0x4));

@@ -1578,7 +1605,7 @@ static int mlxbf_i2c_slave_disable(struct mlxbf_i2c_priv *priv, u8 addr)
* Check if addr is present in the registers.
*/
for (reg = 0; reg < reg_cnt; reg++) {
- slave_reg = readl(priv->smbus->io +
+ slave_reg = readl(priv->slv->io +
MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);

/* Check whether the address slots are empty. */
@@ -1599,7 +1626,7 @@ static int mlxbf_i2c_slave_disable(struct mlxbf_i2c_priv *priv, u8 addr)
if (addr_tmp == addr) {
/* Clear the slave address slot. */
slave_reg &= ~(GENMASK(7, 0) << (byte * 8));
- writel(slave_reg, priv->smbus->io +
+ writel(slave_reg, priv->slv->io +
MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG +
(reg * 0x4));
/* Free slave at the corresponding index */
@@ -1703,7 +1730,7 @@ static int mlxbf_i2c_init_slave(struct platform_device *pdev,
int ret;

/* Reset FSM. */
- writel(0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_FSM);
+ writel(0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_FSM);

/*
* Enable slave cause interrupt bits. Drive
@@ -1718,7 +1745,7 @@ static int mlxbf_i2c_init_slave(struct platform_device *pdev,
writel(int_reg, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_EVTEN0);

/* Finally, set the 'ready' bit to start handling transactions. */
- writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY);
+ writel(0x1, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_READY);

/* Initialize the cause coalesce resource. */
ret = mlxbf_i2c_init_coalesce(pdev, priv);
@@ -1763,13 +1790,13 @@ static bool mlxbf_i2c_has_coalesce(struct mlxbf_i2c_priv *priv, bool *read,
return true;
}

-static bool mlxbf_smbus_slave_wait_for_idle(struct mlxbf_i2c_priv *priv,
+static bool mlxbf_i2c_slave_wait_for_idle(struct mlxbf_i2c_priv *priv,
u32 timeout)
{
u32 mask = MLXBF_I2C_CAUSE_S_GW_BUSY_FALL;
u32 addr = MLXBF_I2C_CAUSE_ARBITER;

- if (mlxbf_smbus_poll(priv->slv_cause->io, addr, mask, false, timeout))
+ if (mlxbf_i2c_poll(priv->slv_cause->io, addr, mask, false, timeout))
return true;

return false;
@@ -1808,7 +1835,7 @@ static int mlxbf_i2c_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
* determine the slave address. This byte is located in the
* first data descriptor register of the slave GW.
*/
- data32 = ioread32be(priv->smbus->io +
+ data32 = ioread32be(priv->slv->io +
MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
addr = (data32 & GENMASK(7, 0)) >> 1;

@@ -1862,7 +1889,7 @@ static int mlxbf_i2c_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)

/* Write data to Slave GW data descriptor. */
mlxbf_i2c_smbus_write_data(priv, data_desc, byte_cnt,
- MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+ MLXBF_I2C_SLAVE_DATA_DESC_ADDR, false);

pec_en = 0; /* Disable PEC since it is not supported. */

@@ -1871,19 +1898,19 @@ static int mlxbf_i2c_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
control32 |= rol32(write_size, MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT);
control32 |= rol32(pec_en, MLXBF_I2C_SLAVE_SEND_PEC_SHIFT);

- writel(control32, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_GW);
+ writel(control32, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_GW);

/*
* Wait until the transfer is completed; the driver will wait
* until the GW is idle, a cause will rise on fall of GW busy.
*/
- mlxbf_smbus_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT);
+ mlxbf_i2c_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT);

clear_csr:
/* Release the Slave GW. */
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
- writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY);
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
+ writel(0x1, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_READY);

return ret;
}
@@ -1901,7 +1928,7 @@ static int mlxbf_i2c_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes)

/* Read data from Slave GW data descriptor. */
mlxbf_i2c_smbus_read_data(priv, data_desc, recv_bytes,
- MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+ MLXBF_I2C_SLAVE_DATA_DESC_ADDR, false);
addr = data_desc[0] >> 1;

/*
@@ -1937,9 +1964,9 @@ static int mlxbf_i2c_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes)

clear_csr:
/* Release the Slave GW. */
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
- writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
- writel(0x1, priv->smbus->io + MLXBF_I2C_SMBUS_SLAVE_READY);
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
+ writel(0x1, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_READY);

return ret;
}
@@ -1974,7 +2001,7 @@ static irqreturn_t mlxbf_i2c_irq(int irq, void *ptr)
* slave, if the higher 8 bits are sent then the slave expect N bytes
* from the master.
*/
- rw_bytes_reg = readl(priv->smbus->io +
+ rw_bytes_reg = readl(priv->slv->io +
MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
recv_bytes = (rw_bytes_reg >> 8) & GENMASK(7, 0);

@@ -2139,14 +2166,27 @@ static struct mlxbf_i2c_chip_info mlxbf_i2c_chip[] = {
[1] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_1],
[2] = &mlxbf_i2c_gpio_res[MLXBF_I2C_CHIP_TYPE_1]
},
- .calculate_freq = mlxbf_calculate_freq_from_tyu
+ .calculate_freq = mlxbf_i2c_calculate_freq_from_tyu,
+ .smbus_master_rs_bytes_off = MLXBF_I2C_YU_SMBUS_RS_BYTES,
+ .smbus_master_fsm_off = MLXBF_I2C_YU_SMBUS_MASTER_FSM
},
[MLXBF_I2C_CHIP_TYPE_2] = {
.type = MLXBF_I2C_CHIP_TYPE_2,
.shared_res = {
[0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_2]
},
- .calculate_freq = mlxbf_calculate_freq_from_yu
+ .calculate_freq = mlxbf_i2c_calculate_freq_from_yu,
+ .smbus_master_rs_bytes_off = MLXBF_I2C_YU_SMBUS_RS_BYTES,
+ .smbus_master_fsm_off = MLXBF_I2C_YU_SMBUS_MASTER_FSM
+ },
+ [MLXBF_I2C_CHIP_TYPE_3] = {
+ .type = MLXBF_I2C_CHIP_TYPE_3,
+ .shared_res = {
+ [0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_3]
+ },
+ .calculate_freq = mlxbf_i2c_calculate_freq_from_yu,
+ .smbus_master_rs_bytes_off = MLXBF_I2C_RSH_YU_SMBUS_RS_BYTES,
+ .smbus_master_fsm_off = MLXBF_I2C_RSH_YU_SMBUS_MASTER_FSM
}
};

@@ -2171,6 +2211,10 @@ static const struct of_device_id mlxbf_i2c_dt_ids[] = {
.compatible = "mellanox,i2c-mlxbf2",
.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2]
},
+ {
+ .compatible = "mellanox,i2c-mlxbf3",
+ .data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_3]
+ },
{},
};

@@ -2180,6 +2224,7 @@ MODULE_DEVICE_TABLE(of, mlxbf_i2c_dt_ids);
static const struct acpi_device_id mlxbf_i2c_acpi_ids[] = {
{ "MLNXBF03", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1] },
{ "MLNXBF23", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2] },
+ { "MLNXBF31", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_3] },
{},
};

@@ -2268,10 +2313,24 @@ static int mlxbf_i2c_probe(struct platform_device *pdev)
if (ret < 0)
return ret;

- ret = mlxbf_i2c_init_resource(pdev, &priv->smbus,
- MLXBF_I2C_SMBUS_RES);
+ ret = mlxbf_i2c_init_resource(pdev, &priv->timer,
+ MLXBF_I2C_SMBUS_TIMER_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch timer resource info");
+ return ret;
+ }
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->mst,
+ MLXBF_I2C_SMBUS_MST_RES);
if (ret < 0) {
- dev_err(dev, "Cannot fetch smbus resource info");
+ dev_err(dev, "Cannot fetch master resource info");
+ return ret;
+ }
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->slv,
+ MLXBF_I2C_SMBUS_SLV_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch slave resource info");
return ret;
}

@@ -2360,7 +2419,13 @@ static int mlxbf_i2c_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct resource *params;

- params = priv->smbus->params;
+ params = priv->timer->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+
+ params = priv->mst->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+
+ params = priv->slv->params;
devm_release_mem_region(dev, params->start, resource_size(params));

params = priv->mst_cause->params;
--
2.30.1