[PATCH 5.18 0236/1095] ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs

From: Greg Kroah-Hartman
Date: Mon Aug 15 2022 - 16:44:40 EST


From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

[ Upstream commit 5c554c2d67a8c6c43a1fb542cbc73c33ff04c344 ]

Sony Xperia Z1 and Z1 compact are almost identical, and that shows in
their DTs. Commonize the repeating parts and modernize the DTs to use
labels.

As a bonus, Z1C gains touchscreen support in this commit, as it was
present on Z1 already.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220415115633.575010-13-konrad.dybcio@xxxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../dts/qcom-msm8974-sony-xperia-amami.dts | 432 +---------------
.../dts/qcom-msm8974-sony-xperia-honami.dts | 479 +-----------------
.../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 449 ++++++++++++++++
arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +-
4 files changed, 456 insertions(+), 906 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
index 6545917dd489..68d5626bf491 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
@@ -1,435 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"

/ {
model = "Sony Xperia Z1 Compact";
compatible = "sony,xperia-amami", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
- };
-
- memory@0 {
- reg = <0 0x40000000>, <0x40000000 0x40000000>;
- device_type = "memory";
- };
-
- smd {
- rpm {
- rpm-requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-boot-on;
- regulator-system-load = <200000>;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
- };
- };
};

-&soc {
- sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- bus-width = <4>;
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
- };
-
- serial@f991e000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
- };
-
-
- pinctrl@fd510000 {
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
- };
-
- dma-controller@f9944000 {
- qcom,controlled-remotely;
- };
-
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-};
-
-&spmi_bus {
- pm8941@0 {
- charger@1000 {
- qcom,fast-charge-safe-current = <1300000>;
- qcom,fast-charge-current-limit = <1300000>;
- qcom,dc-current-limit = <1300000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
- };
-
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3", "gpio4", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
- };
-
- coincell@2800 {
- status = "okay";
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
- };
- };
-
- pm8941@1 {
- wled@d800 {
- status = "okay";
-
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
- };
- };
+&smbb {
+ qcom,fast-charge-safe-current = <1300000>;
+ qcom,fast-charge-current-limit = <1300000>;
+ qcom,dc-current-limit = <1300000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 313c755f590f..ea6a941d8f8c 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -1,484 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"

/ {
model = "Sony Xperia Z1";
compatible = "sony,xperia-honami", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
- };
-
- memory@0 {
- reg = <0 0x40000000>, <0x40000000 0x40000000>;
- device_type = "memory";
- };
-
- smd {
- rpm {
- rpm-requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-boot-on;
- regulator-system-load = <200000>;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
- };
- };
-};
-
-&soc {
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-
- sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- bus-width = <4>;
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
- };
-
- serial@f991e000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
- };
-
- i2c@f9924000 {
- status = "okay";
-
- clock-frequency = <355000>;
- qcom,src-freq = <50000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- synaptics@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
-
- interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_pin>;
-
- syna,startup-delay-ms = <10>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- touchscreen-inverted-x;
- syna,sensor-type = <1>;
- };
- };
- };
-
- pinctrl@fd510000 {
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- ts_int_pin: touch-int {
- pin {
- pins = "gpio61";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- input-enable;
- };
- };
- };
-
- dma-controller@f9944000 {
- qcom,controlled-remotely;
- };
-};
-
-&spmi_bus {
- pm8941@0 {
- charger@1000 {
- qcom,fast-charge-safe-current = <1500000>;
- qcom,fast-charge-current-limit = <1500000>;
- qcom,dc-current-limit = <1800000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
- };
-
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3", "gpio4", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
- };
-
- coincell@2800 {
- status = "okay";
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
- };
- };
-
- pm8941@1 {
- wled@d800 {
- status = "okay";
-
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
- };
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
new file mode 100644
index 000000000000..87ec3694add9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ synaptics@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+
+ interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_pin>;
+
+ syna,startup-delay-ms = <10>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-x;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_pin_a>;
+};
+
+&blsp2_dma {
+ qcom,controlled-remotely;
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+};
+
+&pm8941_coincell {
+ status = "okay";
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+};
+
+&pm8941_wled {
+ status = "okay";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+};
+
+&rpm_requests {
+ pm8841-regulators {
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s4: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+ ts_int_pin: touch-int {
+ pin {
+ pins = "gpio61";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins: i2c2 {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index da00b8f5eecd..cdd2bdb77b32 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -131,7 +131,7 @@ pm8941_iadc: iadc@3600 {
qcom,external-resistor-micro-ohms = <10000>;
};

- coincell@2800 {
+ pm8941_coincell: coincell@2800 {
compatible = "qcom,pm8941-coincell";
reg = <0x2800>;
status = "disabled";
--
2.35.1