[PATCH 1/9] scsi: 53c700: move spin_lock_irqsave to spin_lock in interrupt handler

From: Tuo Cao
Date: Sun Aug 14 2022 - 02:44:30 EST


it is unnecessary to call spin_lock_irqsave in a interrupt handler.

Signed-off-by: Tuo Cao <91tuocao@xxxxxxxxx>
---
drivers/scsi/53c700.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index e1e4f9d10887..55dc0fb7943e 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1490,7 +1490,6 @@ NCR_700_intr(int irq, void *dev_id)
__u8 istat;
__u32 resume_offset = 0;
__u8 pun = 0xff, lun = 0xff;
- unsigned long flags;
int handled = 0;

/* Use the host lock to serialise access to the 53c700
@@ -1498,7 +1497,7 @@ NCR_700_intr(int irq, void *dev_id)
* lock to enter the done routines. When that happens, we
* need to ensure that for this driver, the host lock and the
* queue lock point to the same thing. */
- spin_lock_irqsave(host->host_lock, flags);
+ spin_lock(host->host_lock);
if((istat = NCR_700_readb(host, ISTAT_REG))
& (SCSI_INT_PENDING | DMA_INT_PENDING)) {
__u32 dsps;
@@ -1746,7 +1745,7 @@ NCR_700_intr(int irq, void *dev_id)
}
}
out_unlock:
- spin_unlock_irqrestore(host->host_lock, flags);
+ spin_unlock(host->host_lock);
return IRQ_RETVAL(handled);
}

--
2.17.1