Re: kernel v5.19 warn in usb_composite_setup_continue

From: Alan Stern
Date: Thu Aug 11 2022 - 13:14:04 EST


On Thu, Aug 11, 2022 at 10:02:26AM +0800, Rondreis wrote:
> Hello,
>
> When fuzzing the Linux kernel driver 5.19.0-rc4-00208-g69cb6c6556ad,
> the following crash was triggered.
>
> HEAD commit: 4b0986a3613c92f4ec1bdc7f60ec66fea135991f (HEAD, tag: v5.18)
> git tree: upstream
>
> kernel config: https://pastebin.com/KecL2gaG
> C reproducer: https://pastebin.com/gTWJQwsh
> console output: https://pastebin.com/iHzBVP3B
>
> Basically, in the c reproducer, we use the gadget module to emulate
> the process of attaching a usb device (vendor id: 0x45e, product id:
> 0x6d, with function: loopback_null).
> To reproduce this crash, we utilize a third-party library to emulate
> the attaching process: https://github.com/linux-usb-gadgets/libusbgx.
> Just clone this repository, make install it, and compile the c
> reproducer with ``` gcc crash.c -lusbgx -o crash ``` will do the
> trick.
>
> It seems that an error state in struct usb_device trigger such kernel warning.
>
> The crash report is as follow:
>
> ```
> input: Media Center Ed. eHome Infrared Remote Transceiver (045e:006d)
> as /devices/platform/dummy_hcd.5/usb6/6-1/6-1:1.0/rc/rc0/input4
> ------------[ cut here ]------------
> usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
> WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
> usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
> Modules linked in:
> CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> 1.13.0-1ubuntu1.1 04/01/2014
> Workqueue: usb_hub_wq hub_event
> RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
> Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
> 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
> e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
> RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
> RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
> RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
> RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
> R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
> R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
> FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
> Call Trace:
> <TASK>
> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
> usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
> usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
> mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
> mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807
> usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:396
> call_driver_probe drivers/base/dd.c:555 [inline]
> really_probe drivers/base/dd.c:634 [inline]
> really_probe+0x23e/0xa80 drivers/base/dd.c:579
> __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:764
> driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:794
> __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:917
> bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427
> __device_attach+0x283/0x490 drivers/base/dd.c:989
> bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487
> device_add+0xc9b/0x1da0 drivers/base/core.c:3417
> usb_set_configuration+0x1019/0x1900 drivers/usb/core/message.c:2170
> usb_generic_driver_probe+0x9d/0xe0 drivers/usb/core/generic.c:238
> usb_probe_device+0xd9/0x2a0 drivers/usb/core/driver.c:293
> call_driver_probe drivers/base/dd.c:555 [inline]
> really_probe drivers/base/dd.c:634 [inline]
> really_probe+0x23e/0xa80 drivers/base/dd.c:579
> __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:764
> driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:794
> __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:917
> bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427
> __device_attach+0x283/0x490 drivers/base/dd.c:989
> bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487
> device_add+0xc9b/0x1da0 drivers/base/core.c:3417
> usb_new_device.cold+0x4b8/0x10ca drivers/usb/core/hub.c:2566
> hub_port_connect drivers/usb/core/hub.c:5363 [inline]
> hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
> port_event drivers/usb/core/hub.c:5663 [inline]
> hub_event+0x232d/0x4180 drivers/usb/core/hub.c:5745
> process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289
> worker_thread+0x623/0x1070 kernel/workqueue.c:2436
> kthread+0x2ef/0x3a0 kernel/kthread.c:376
> ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
> </TASK>
>
>
> ```

Can you test the patch below?

Alan Stern



Index: usb-devel/drivers/media/rc/mceusb.c
===================================================================
--- usb-devel.orig/drivers/media/rc/mceusb.c
+++ usb-devel/drivers/media/rc/mceusb.c
@@ -1416,42 +1416,37 @@ static void mceusb_gen1_init(struct mceu
{
int ret;
struct device *dev = ir->dev;
- char *data;
-
- data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
- if (!data) {
- dev_err(dev, "%s: memory allocation failed!", __func__);
- return;
- }
+ char data[USB_CTRL_MSG_SZ];

/*
* This is a strange one. Windows issues a set address to the device
* on the receive control pipe and expect a certain value pair back
*/
- ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
- data, USB_CTRL_MSG_SZ, 3000);
+ ret = usb_control_msg_recv(ir->usbdev, 0, USB_REQ_SET_ADDRESS,
+ USB_DIR_IN | USB_TYPE_VENDOR,
+ 0, 0, data, USB_CTRL_MSG_SZ, 3000,
+ GFP_KERNEL);
dev_dbg(dev, "set address - ret = %d", ret);
dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
data[0], data[1]);

/* set feature: bit rate 38400 bps */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
- 0xc04e, 0x0000, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+ 0xc04e, 0x0000, NULL, 0, 3000, GFP_KERNEL);

dev_dbg(dev, "set feature - ret = %d", ret);

/* bRequest 4: set char length to 8 bits */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 4, USB_TYPE_VENDOR,
- 0x0808, 0x0000, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ 4, USB_TYPE_VENDOR,
+ 0x0808, 0x0000, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set char length - retB = %d", ret);

/* bRequest 2: set handshaking to use DTR/DSR */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 2, USB_TYPE_VENDOR,
- 0x0000, 0x0100, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ 2, USB_TYPE_VENDOR,
+ 0x0000, 0x0100, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set handshake - retC = %d", ret);

/* device resume */
@@ -1459,8 +1454,6 @@ static void mceusb_gen1_init(struct mceu

/* get hw/sw revision? */
mce_command_out(ir, GET_REVISION, sizeof(GET_REVISION));
-
- kfree(data);
}

static void mceusb_gen2_init(struct mceusb_dev *ir)