Re: [PATCH 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block

[Lad, Prabhakar]

Hi Krzysztof,

Thank you for the review.

On Tue, Aug 2, 2022 at 8:36 AM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 01/08/2022 23:47, Lad Prabhakar wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > RFC v2 -> v1
>
> Too many "media" in the subject prefixes.
>
I followed the pattern seen by "git log --oneline
Documentation/devicetree/bindings/media/", but I do agree I can drop
the extra "media" after "dt-bindings:"

> > * Fixed review comments pointed by Rob and Jacopo.
> >
> > RFC v1 -> RFC v2
> > * New patch
> > ---
> >  .../bindings/media/renesas,rzg2l-csi2.yaml    | 149 ++++++++++++++++++
> >  1 file changed, 149 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > new file mode 100644
> > index 000000000000..f82f88c096df
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -0,0 +1,149 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > +
> > +description:
> > +  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
> > +  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
> > +  with the Image Processing module, which provides the video capture capabilities.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
> > +              - renesas,r9a07g054-csi2       # RZ/V2L
> > +          - const: renesas,rzg2l-csi2
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-names:
> > +    const: csi2_link
> > +
> > +  clocks:
> > +    items:
> > +      - description: Internal clock for connecting CRU and MIPI
> > +      - description: CRU Main clock
> > +      - description: CPU Register access clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: sysclk
> > +      - const: vclk
> > +      - const: pclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: CRU_CMN_RSTB reset terminal
> > +
> > +  reset-names:
> > +    const: cmn-rstb
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing the CSI-2 transmitter.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +                items:
> > +                  maximum: 4
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port node, Image Processing block connected to the CSI-2 receiver.
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    csi20: csi2@10830400 {
>
> Node name just "csi"
>
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
OK will replace it with csi.

>
> > +            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> > +            reg = <0x10830400 0xfc00>;
>
> Please use 4-space indentation for example DTS.
>
Sure will do.

Cheers,
Prabhakar

> > +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> > +            clock-names = "sysclk", "vclk", "pclk";
> > +            power-domains = <&cpg>;
> > +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> > +            reset-names = "cmn-rstb";
> > +
> > +            ports {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> > +                    port@0 {
> > +                            reg = <0>;
> > +
> > +                            csi2_in: endpoint {
> > +                                    clock-lanes = <0>;
> > +                                    data-lanes = <1 2>;
> > +                                    remote-endpoint = <&ov5645_ep>;
> > +                            };
> > +                    };
> > +
> > +                    port@1 {
> > +                            #address-cells = <1>;
> > +                            #size-cells = <0>;
> > +
> > +                            reg = <1>;
> > +
> > +                            csi2cru: endpoint@0 {
> > +                                    reg = <0>;
> > +                                    remote-endpoint = <&crucsi2>;
> > +                            };
> > +                    };
> > +            };
> > +    };
>
>
> Best regards,
> Krzysztof