[PATCH 5.18 85/88] EDAC/synopsys: Re-enable the error interrupts on v3 hw

From: Greg Kroah-Hartman
Date: Mon Aug 01 2022 - 08:19:14 EST


From: Sherry Sun <sherry.sun@xxxxxxx>

commit 4bcffe941758ee17becb43af3b25487f848f6512 upstream.

zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after
an interrupt for a {un-,}correctable error is raised, which disables
the error interrupts. Then the interrupt handler will be called only
once. Therefore, re-enable the error interrupt line at the end of
intr_handler() for v3.x Synopsys EDAC DDR.

Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xxxxxxxxxx>
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/edac/synopsys_edac.c | 47 ++++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 22 deletions(-)

--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -527,6 +527,28 @@ static void handle_error(struct mem_ctl_
memset(p, 0, sizeof(*p));
}

+static void enable_intr(struct synps_edac_priv *priv)
+{
+ /* Enable UE/CE Interrupts */
+ if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+ writel(DDR_UE_MASK | DDR_CE_MASK,
+ priv->baseaddr + ECC_CLR_OFST);
+ else
+ writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+ priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+
+}
+
+static void disable_intr(struct synps_edac_priv *priv)
+{
+ /* Disable UE/CE Interrupts */
+ if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+ writel(0x0, priv->baseaddr + ECC_CLR_OFST);
+ else
+ writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+ priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
+}
+
/**
* intr_handler - Interrupt Handler for ECC interrupts.
* @irq: IRQ number.
@@ -568,6 +590,9 @@ static irqreturn_t intr_handler(int irq,
/* v3.0 of the controller does not have this register */
if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+ else
+ enable_intr(priv);
+
return IRQ_HANDLED;
}

@@ -850,28 +875,6 @@ static void mc_init(struct mem_ctl_info
init_csrows(mci);
}

-static void enable_intr(struct synps_edac_priv *priv)
-{
- /* Enable UE/CE Interrupts */
- if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
- writel(DDR_UE_MASK | DDR_CE_MASK,
- priv->baseaddr + ECC_CLR_OFST);
- else
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
-
-}
-
-static void disable_intr(struct synps_edac_priv *priv)
-{
- /* Disable UE/CE Interrupts */
- if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
- writel(0x0, priv->baseaddr + ECC_CLR_OFST);
- else
- writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
- priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
-}
-
static int setup_irq(struct mem_ctl_info *mci,
struct platform_device *pdev)
{