[PATCH 4/5] drm/amd/display: move FPU code from dcn30 clk mgr to DML folder

From: Melissa Wen
Date: Wed Jul 20 2022 - 15:33:40 EST

Next message: Melissa Wen: "[PATCH 5/5] drm/amd/display: move FPU code from dcn301 clk mgr to DML folder"
Previous message: Melissa Wen: "[PATCH 3/5] drm/amd/display: move FPU code on dcn21 clk_mgr"
In reply to: Rodrigo Siqueira Jordao: "Re: [PATCH 3/5] drm/amd/display: move FPU code on dcn21 clk_mgr"
Next in thread: Rodrigo Siqueira Jordao: "Re: [PATCH 4/5] drm/amd/display: move FPU code from dcn30 clk mgr to DML folder"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The -mno-gnu-attribute option in clk mgr makefile for dcn30 hides a soft
vs hard fp error for powerpc. After removing this flag, we can see some
FPU code remains there:

gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.o
uses soft float

Therefore, remove the -mno-gnu-attribute flag for dcn30/powerpc and move
FPU-associated code to DML folder.

Signed-off-by: Melissa Wen <mwen@xxxxxxxxxx>
---
.../gpu/drm/amd/display/dc/clk_mgr/Makefile | 6 --
.../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 63 ++-----------------
.../drm/amd/display/dc/dml/dcn30/dcn30_fpu.c | 63 ++++++++++++++++++-
.../drm/amd/display/dc/dml/dcn30/dcn30_fpu.h | 1 +
4 files changed, 68 insertions(+), 65 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile b/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile
index 66dc02c426e9..15b660a951a5 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/Makefile
@@ -115,12 +115,6 @@ AMD_DISPLAY_FILES += $(AMD_DAL_CLK_MGR_DCN21)
###############################################################################
CLK_MGR_DCN30 = dcn30_clk_mgr.o dcn30_clk_mgr_smu_msg.o

-# prevent build errors regarding soft-float vs hard-float FP ABI tags
-# this code is currently unused on ppc64, as it applies to VanGogh APUs only
-ifdef CONFIG_PPC64
-CFLAGS_$(AMDDALPATH)/dc/clk_mgr/dcn30/dcn30_clk_mgr.o := $(call cc-option,-mno-gnu-attribute)
-endif
-
AMD_DAL_CLK_MGR_DCN30 = $(addprefix $(AMDDALPATH)/dc/clk_mgr/dcn30/,$(CLK_MGR_DCN30))

AMD_DISPLAY_FILES += $(AMD_DAL_CLK_MGR_DCN30)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
index 914708cefc79..3ce0ee0d012f 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
@@ -29,6 +29,7 @@
#include "dcn20/dcn20_clk_mgr.h"
#include "dce100/dce_clk_mgr.h"
#include "dcn30/dcn30_clk_mgr.h"
+#include "dml/dcn30/dcn30_fpu.h"
#include "reg_helper.h"
#include "core_types.h"
#include "dm_helpers.h"
@@ -97,65 +98,11 @@ static void dcn3_init_single_clock(struct clk_mgr_internal *clk_mgr, uint32_t cl
}
}

-static noinline void dcn3_build_wm_range_table(struct clk_mgr_internal *clk_mgr)
+static void dcn3_build_wm_range_table(struct clk_mgr_internal *clk_mgr)
{
- /* defaults */
- double pstate_latency_us = clk_mgr->base.ctx->dc->dml.soc.dram_clock_change_latency_us;
- double sr_exit_time_us = clk_mgr->base.ctx->dc->dml.soc.sr_exit_time_us;
- double sr_enter_plus_exit_time_us = clk_mgr->base.ctx->dc->dml.soc.sr_enter_plus_exit_time_us;
- uint16_t min_uclk_mhz = clk_mgr->base.bw_params->clk_table.entries[0].memclk_mhz;
-
- /* Set A - Normal - default values*/
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].valid = true;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us = pstate_latency_us;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].dml_input.sr_exit_time_us = sr_exit_time_us;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].dml_input.sr_enter_plus_exit_time_us = sr_enter_plus_exit_time_us;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.wm_type = WATERMARKS_CLOCK_RANGE;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.min_dcfclk = 0;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.max_dcfclk = 0xFFFF;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.min_uclk = min_uclk_mhz;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.max_uclk = 0xFFFF;
-
- /* Set B - Performance - higher minimum clocks */
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].valid = true;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].dml_input.pstate_latency_us = pstate_latency_us;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].dml_input.sr_exit_time_us = sr_exit_time_us;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].dml_input.sr_enter_plus_exit_time_us = sr_enter_plus_exit_time_us;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.wm_type = WATERMARKS_CLOCK_RANGE;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.min_dcfclk = TUNED VALUE;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.max_dcfclk = 0xFFFF;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.min_uclk = TUNED VALUE;
-// clk_mgr->base.bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.max_uclk = 0xFFFF;
-
- /* Set C - Dummy P-State - P-State latency set to "dummy p-state" value */
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].valid = true;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].dml_input.pstate_latency_us = 0;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].dml_input.sr_exit_time_us = sr_exit_time_us;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].dml_input.sr_enter_plus_exit_time_us = sr_enter_plus_exit_time_us;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.wm_type = WATERMARKS_DUMMY_PSTATE;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.min_dcfclk = 0;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.max_dcfclk = 0xFFFF;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.min_uclk = min_uclk_mhz;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.max_uclk = 0xFFFF;
- clk_mgr->base.bw_params->dummy_pstate_table[0].dram_speed_mts = 1600;
- clk_mgr->base.bw_params->dummy_pstate_table[0].dummy_pstate_latency_us = 38;
- clk_mgr->base.bw_params->dummy_pstate_table[1].dram_speed_mts = 8000;
- clk_mgr->base.bw_params->dummy_pstate_table[1].dummy_pstate_latency_us = 9;
- clk_mgr->base.bw_params->dummy_pstate_table[2].dram_speed_mts = 10000;
- clk_mgr->base.bw_params->dummy_pstate_table[2].dummy_pstate_latency_us = 8;
- clk_mgr->base.bw_params->dummy_pstate_table[3].dram_speed_mts = 16000;
- clk_mgr->base.bw_params->dummy_pstate_table[3].dummy_pstate_latency_us = 5;
-
- /* Set D - MALL - SR enter and exit times adjusted for MALL */
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].valid = true;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].dml_input.pstate_latency_us = pstate_latency_us;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].dml_input.sr_exit_time_us = 2;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].dml_input.sr_enter_plus_exit_time_us = 4;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.wm_type = WATERMARKS_MALL;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.min_dcfclk = 0;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.max_dcfclk = 0xFFFF;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.min_uclk = min_uclk_mhz;
- clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.max_uclk = 0xFFFF;
+ DC_FP_START();
+ dcn3_fpu_build_wm_range_table(&clk_mgr->base);
+ DC_FP_END();
}

void dcn3_init_clocks(struct clk_mgr *clk_mgr_base)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
index a8db1306750e..c00f759fdded 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.c
@@ -29,7 +29,7 @@
#include "dcn20/dcn20_resource.h"
#include "dcn30/dcn30_resource.h"

-
+#include "clk_mgr/dcn30/dcn30_smu11_driver_if.h"
#include "display_mode_vba_30.h"
#include "dcn30_fpu.h"

@@ -616,4 +616,65 @@ void dcn30_fpu_update_bw_bounding_box(struct dc *dc,

}

+void dcn3_fpu_build_wm_range_table(struct clk_mgr *base)
+{
+ /* defaults */
+ double pstate_latency_us = base->ctx->dc->dml.soc.dram_clock_change_latency_us;
+ double sr_exit_time_us = base->ctx->dc->dml.soc.sr_exit_time_us;
+ double sr_enter_plus_exit_time_us = base->ctx->dc->dml.soc.sr_enter_plus_exit_time_us;
+ uint16_t min_uclk_mhz = base->bw_params->clk_table.entries[0].memclk_mhz;

+ dc_assert_fp_enabled();
+
+ /* Set A - Normal - default values*/
+ base->bw_params->wm_table.nv_entries[WM_A].valid = true;
+ base->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us = pstate_latency_us;
+ base->bw_params->wm_table.nv_entries[WM_A].dml_input.sr_exit_time_us = sr_exit_time_us;
+ base->bw_params->wm_table.nv_entries[WM_A].dml_input.sr_enter_plus_exit_time_us = sr_enter_plus_exit_time_us;
+ base->bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.wm_type = WATERMARKS_CLOCK_RANGE;
+ base->bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.min_dcfclk = 0;
+ base->bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.max_dcfclk = 0xFFFF;
+ base->bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.min_uclk = min_uclk_mhz;
+ base->bw_params->wm_table.nv_entries[WM_A].pmfw_breakdown.max_uclk = 0xFFFF;
+
+ /* Set B - Performance - higher minimum clocks */
+// base->bw_params->wm_table.nv_entries[WM_B].valid = true;
+// base->bw_params->wm_table.nv_entries[WM_B].dml_input.pstate_latency_us = pstate_latency_us;
+// base->bw_params->wm_table.nv_entries[WM_B].dml_input.sr_exit_time_us = sr_exit_time_us;
+// base->bw_params->wm_table.nv_entries[WM_B].dml_input.sr_enter_plus_exit_time_us = sr_enter_plus_exit_time_us;
+// base->bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.wm_type = WATERMARKS_CLOCK_RANGE;
+// base->bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.min_dcfclk = TUNED VALUE;
+// base->bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.max_dcfclk = 0xFFFF;
+// base->bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.min_uclk = TUNED VALUE;
+// base->bw_params->wm_table.nv_entries[WM_B].pmfw_breakdown.max_uclk = 0xFFFF;
+
+ /* Set C - Dummy P-State - P-State latency set to "dummy p-state" value */
+ base->bw_params->wm_table.nv_entries[WM_C].valid = true;
+ base->bw_params->wm_table.nv_entries[WM_C].dml_input.pstate_latency_us = 0;
+ base->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_exit_time_us = sr_exit_time_us;
+ base->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_enter_plus_exit_time_us = sr_enter_plus_exit_time_us;
+ base->bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.wm_type = WATERMARKS_DUMMY_PSTATE;
+ base->bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.min_dcfclk = 0;
+ base->bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.max_dcfclk = 0xFFFF;
+ base->bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.min_uclk = min_uclk_mhz;
+ base->bw_params->wm_table.nv_entries[WM_C].pmfw_breakdown.max_uclk = 0xFFFF;
+ base->bw_params->dummy_pstate_table[0].dram_speed_mts = 1600;
+ base->bw_params->dummy_pstate_table[0].dummy_pstate_latency_us = 38;
+ base->bw_params->dummy_pstate_table[1].dram_speed_mts = 8000;
+ base->bw_params->dummy_pstate_table[1].dummy_pstate_latency_us = 9;
+ base->bw_params->dummy_pstate_table[2].dram_speed_mts = 10000;
+ base->bw_params->dummy_pstate_table[2].dummy_pstate_latency_us = 8;
+ base->bw_params->dummy_pstate_table[3].dram_speed_mts = 16000;
+ base->bw_params->dummy_pstate_table[3].dummy_pstate_latency_us = 5;
+
+ /* Set D - MALL - SR enter and exit times adjusted for MALL */
+ base->bw_params->wm_table.nv_entries[WM_D].valid = true;
+ base->bw_params->wm_table.nv_entries[WM_D].dml_input.pstate_latency_us = pstate_latency_us;
+ base->bw_params->wm_table.nv_entries[WM_D].dml_input.sr_exit_time_us = 2;
+ base->bw_params->wm_table.nv_entries[WM_D].dml_input.sr_enter_plus_exit_time_us = 4;
+ base->bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.wm_type = WATERMARKS_MALL;
+ base->bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.min_dcfclk = 0;
+ base->bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.max_dcfclk = 0xFFFF;
+ base->bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.min_uclk = min_uclk_mhz;
+ base->bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.max_uclk = 0xFFFF;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
index dedfe7b5f173..c2024052a497 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/dcn30_fpu.h
@@ -63,5 +63,6 @@ void dcn30_fpu_update_bw_bounding_box(struct dc *dc,
unsigned int *dcfclk_mhz,
unsigned int *dram_speed_mts);

+void dcn3_fpu_build_wm_range_table(struct clk_mgr *base);

#endif /* __DCN30_FPU_H__*/
--
2.35.1

Next message: Melissa Wen: "[PATCH 5/5] drm/amd/display: move FPU code from dcn301 clk mgr to DML folder"
Previous message: Melissa Wen: "[PATCH 3/5] drm/amd/display: move FPU code on dcn21 clk_mgr"
In reply to: Rodrigo Siqueira Jordao: "Re: [PATCH 3/5] drm/amd/display: move FPU code on dcn21 clk_mgr"
Next in thread: Rodrigo Siqueira Jordao: "Re: [PATCH 4/5] drm/amd/display: move FPU code from dcn30 clk mgr to DML folder"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]