Re: [RFC Patch net-next 06/10] net: dsa: microchip: lan937x: add support for configuing xMII register
From: Arun.Ramadoss
Date: Tue Jul 19 2022 - 11:55:48 EST
Hi Vladimir,
On Tue, 2022-07-19 at 14:04 +0300, Vladimir Oltean wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> On Tue, Jul 12, 2022 at 09:33:04PM +0530, Arun Ramadoss wrote:
> > This patch add the common ksz_set_xmii function for ksz series
> > switch
> > and update the lan937x code phylink mac config. The register
> > address for
> > the ksz8795 is Port 5 Interface control 6 and for all other switch
> > is
> > xMII Control 1.
> > The bit value for selecting the interface is same for
> > KSZ8795 and KSZ9893 are same. The bit values for KSZ9477 and
> > lan973x are
> > same. So, this patch add the bit value for each switches in
> > ksz_chip_data and configure the registers based on the chip id.
> >
> > Signed-off-by: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
> > ---
> > drivers/net/dsa/microchip/ksz_common.c | 57
> > ++++++++++++++++++++++++
> > drivers/net/dsa/microchip/ksz_common.h | 8 ++++
> > drivers/net/dsa/microchip/lan937x_main.c | 32 +------------
> > drivers/net/dsa/microchip/lan937x_reg.h | 9 ----
> > 4 files changed, 66 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/net/dsa/microchip/ksz_common.c
> > b/drivers/net/dsa/microchip/ksz_common.c
> > index 0cb711fcf046..649da4c361c1 100644
> > --- a/drivers/net/dsa/microchip/ksz_common.c
> > +++ b/drivers/net/dsa/microchip/ksz_common.c
> > @@ -284,6 +284,10 @@ static const u32 ksz8795_masks[] = {
> > };
> >
> >
> > +void ksz_set_xmii(struct ksz_device *dev, int port,
> > phy_interface_t interface)
> > +{
> > + const u8 *bitval = dev->info->bitval;
> > + const u16 *regs = dev->info->regs;
> > + u8 data8;
> > +
> > + ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
> > +
> > + data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE |
> > + P_RGMII_ID_EG_ENABLE);
> > +
> > + switch (interface) {
> > + case PHY_INTERFACE_MODE_MII:
> > + data8 |= bitval[P_MII_SEL];
> > + break;
> > + case PHY_INTERFACE_MODE_RMII:
> > + data8 |= bitval[P_RMII_SEL];
> > + break;
> > + case PHY_INTERFACE_MODE_GMII:
> > + data8 |= bitval[P_GMII_SEL];
> > + break;
> > + case PHY_INTERFACE_MODE_RGMII:
> > + case PHY_INTERFACE_MODE_RGMII_ID:
> > + case PHY_INTERFACE_MODE_RGMII_TXID:
> > + case PHY_INTERFACE_MODE_RGMII_RXID:
> > + data8 |= bitval[P_RGMII_SEL];
> > + break;
> > + default:
> > + dev_err(dev->dev, "Unsupported interface '%s' for
> > port %d\n",
> > + phy_modes(interface), port);
> > + return;
> > + }
> > +
> > + if (interface == PHY_INTERFACE_MODE_RGMII_ID ||
> > + interface == PHY_INTERFACE_MODE_RGMII_RXID)
> > + data8 |= P_RGMII_ID_IG_ENABLE;
> > +
> > + if (interface == PHY_INTERFACE_MODE_RGMII_ID ||
> > + interface == PHY_INTERFACE_MODE_RGMII_TXID)
> > + data8 |= P_RGMII_ID_EG_ENABLE;
>
> I'm confused to see RGMII delay handling both in ksz_set_xmii() and
> in
> lan937x_phylink_mac_config(), called immediately afterwards via
> dev->dev_ops->phylink_mac_config(). Can you explain the differences
> between P_RGMII_ID_IG_ENABLE in regs[P_XMII_CTRL_1] and
> RGMII_1_RX_DELAY_2NS
> in REG_PORT_XMII_CTRL_4?
In lan937x RGMII delays are managed by dll register which is not
supported in other ksz switches. REG_PORT_XMII_CTRL_4 and CTRL_5 are
controlled by the P_RGMII_ID_IG_ENABLE & P_RGMII_ID_EG_ENABLE bit. So I
have moved the generic portion of implementation in ksz_set_xmii and
product specific implementation through phylink_mac_config hooks.
>
> > +
> > + /* Write the updated value */
> > + ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
> > +}
> > +
> > static void ksz_phylink_mac_config(struct dsa_switch *ds, int
> > port,
> > unsigned int mode,
> > const struct phylink_link_state
> > *state)
> > diff --git a/drivers/net/dsa/microchip/ksz_common.h
> > b/drivers/net/dsa/microchip/ksz_common.h
> > index db836b376341..90f3ec9ddaec 100644
> > --- a/drivers/net/dsa/microchip/ksz_common.h
> > +++ b/drivers/net/dsa/microchip/ksz_common.h
> > @@ -216,6 +216,10 @@ enum ksz_shifts {
> > };
> >
> > --
> > 2.36.1
> >
>
>