[PATCH 4/4] drm: panel: Add lg sw43408 panel driver
From: Caleb Connolly
Date: Mon Jul 18 2022 - 17:37:42 EST
From: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel, used in some Pixel3
phones.
Whatever init sequence we have for this panel isn't capable of
initialising it completely, toggling the reset gpio ever causes the
panel to die. Until this is resolved we avoid resetting the panel. The
disable/unprepare functions only put the panel to sleep mode and
disable the backlight.
Signed-off-by: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
[vinod: Add DSC support]
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
[caleb: cleanup and support turning off the panel]
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
MAINTAINERS | 8 +
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-lg-sw43408.c | 586 +++++++++++++++++++++++
4 files changed, 606 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-lg-sw43408.c
diff --git a/MAINTAINERS b/MAINTAINERS
index f679152bdbad..8a2b954ad140 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6376,6 +6376,14 @@ S: Orphan / Obsolete
F: drivers/gpu/drm/i810/
F: include/uapi/drm/i810_drm.h
+DRM DRIVER FOR LG SW43408 PANELS
+M: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
+M: Caleb Connolly <caleb@xxxxxxxxxxxxx>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/lg,sw43408-panel.txt
+F: drivers/gpu/drm/panel/panel-lg-sw43408.c
+
DRM DRIVER FOR LVDS PANELS
M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
L: dri-devel@xxxxxxxxxxxxxxxxxxxxx
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 38799effd00a..706b112794b9 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -256,6 +256,17 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
+config DRM_PANEL_LG_SW43408
+ tristate "LG SW43408 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for LG sw43408 panel.
+ The panel has a 1080x2160 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host and has a built-in LED backlight.
+
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 42a7ab54234b..ba26a69b74e7 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3052C) += panel-newvision-nv3052c.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
diff --git a/drivers/gpu/drm/panel/panel-lg-sw43408.c b/drivers/gpu/drm/panel/panel-lg-sw43408.c
new file mode 100644
index 000000000000..c7b8ec7b970d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-lg-sw43408.c
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Linaro Ltd
+ * Author: Sumit Semwal <sumit.semwal@xxxxxxxxxx>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+
+#include <video/mipi_display.h>
+
+struct panel_cmd {
+ size_t len;
+ const char *data;
+};
+
+#define _INIT_CMD(...) \
+ { \
+ .len = sizeof((char[]){ __VA_ARGS__ }), .data = (char[]) \
+ { \
+ __VA_ARGS__ \
+ } \
+ }
+
+static const char *const regulator_names[] = {
+ "vddi",
+ "vpnl",
+};
+
+static const unsigned long regulator_enable_loads[] = {
+ 62000,
+ 857000,
+};
+
+static const unsigned long regulator_disable_loads[] = {
+ 80,
+ 0,
+};
+
+struct sw43408_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *link;
+
+ const struct drm_display_mode *mode;
+ struct backlight_device *backlight;
+
+ struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+
+ struct gpio_desc *reset_gpio;
+
+ bool prepared;
+ bool enabled;
+};
+
+static const struct panel_cmd lg_sw43408_on_cmds_1[] = {
+ _INIT_CMD(0x00, 0x53, 0x0C, 0x30),
+ _INIT_CMD(0x00, 0x55, 0x00, 0x70, 0xDF, 0x00, 0x70, 0xDF),
+ _INIT_CMD(0x00, 0xF7, 0x01, 0x49, 0x0C),
+
+ {},
+};
+
+static const struct panel_cmd lg_sw43408_on_cmds_2[] = {
+ _INIT_CMD(0x00, 0xB0, 0xAC),
+ _INIT_CMD(0x00, 0xCD, 0x00, 0x00, 0x00, 0x19, 0x19, 0x19, 0x19, 0x19,
+ 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x16, 0x16),
+ _INIT_CMD(0x00, 0xCB, 0x80, 0x5C, 0x07, 0x03, 0x28),
+ _INIT_CMD(0x00, 0xC0, 0x02, 0x02, 0x0F),
+ _INIT_CMD(0x00, 0xE5, 0x00, 0x3A, 0x00, 0x3A, 0x00, 0x0E, 0x10),
+ _INIT_CMD(0x00, 0xB5, 0x75, 0x60, 0x2D, 0x5D, 0x80, 0x00, 0x0A, 0x0B,
+ 0x00, 0x05, 0x0B, 0x00, 0x80, 0x0D, 0x0E, 0x40, 0x00, 0x0C,
+ 0x00, 0x16, 0x00, 0xB8, 0x00, 0x80, 0x0D, 0x0E, 0x40, 0x00,
+ 0x0C, 0x00, 0x16, 0x00, 0xB8, 0x00, 0x81, 0x00, 0x03, 0x03,
+ 0x03, 0x01, 0x01),
+ _INIT_CMD(0x00, 0x55, 0x04, 0x61, 0xDB, 0x04, 0x70, 0xDB),
+ _INIT_CMD(0x00, 0xB0, 0xCA),
+
+ {},
+};
+
+static inline struct sw43408_panel *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct sw43408_panel, base);
+}
+
+/*
+ * Currently unable to bring up the panel after resetting, must be missing
+ * some init commands somewhere.
+ */
+static __always_unused int panel_reset(struct sw43408_panel *ctx)
+{
+ int ret = 0, i;
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+ ret = regulator_set_load(ctx->supplies[i].consumer,
+ regulator_enable_loads[i]);
+ if (ret)
+ return ret;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+ ret = regulator_set_load(ctx->supplies[i].consumer,
+ regulator_disable_loads[i]);
+ if (ret) {
+ DRM_DEV_ERROR(ctx->base.dev,
+ "regulator_set_load failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(9000, 10000);
+ gpiod_set_value(ctx->reset_gpio, 1);
+ usleep_range(1000, 2000);
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(9000, 10000);
+
+ return 0;
+}
+
+static int send_mipi_cmds(struct drm_panel *panel, const struct panel_cmd *cmds)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ unsigned int i = 0;
+ int err;
+
+ if (!cmds)
+ return -EFAULT;
+
+ for (i = 0; cmds[i].len != 0; i++) {
+ const struct panel_cmd *cmd = &cmds[i];
+
+ if (cmd->len == 2)
+ err = mipi_dsi_dcs_write(ctx->link, cmd->data[1], NULL,
+ 0);
+ else
+ err = mipi_dsi_dcs_write(ctx->link, cmd->data[1],
+ cmd->data + 2, cmd->len - 2);
+
+ if (err < 0)
+ return err;
+
+ usleep_range((cmd->data[0]) * 1000, (1 + cmd->data[0]) * 1000);
+ }
+
+ return 0;
+}
+
+static int lg_panel_disable(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+
+ backlight_disable(ctx->backlight);
+ ctx->enabled = false;
+
+ return 0;
+}
+
+/*
+ * We can't currently re-initialise the panel properly after powering off.
+ * This function will be used when this is resolved.
+ */
+static __always_unused int lg_panel_power_off(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int i, ret = 0;
+
+ gpiod_set_value(ctx->reset_gpio, 1);
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+ ret = regulator_set_load(ctx->supplies[i].consumer,
+ regulator_disable_loads[i]);
+ if (ret) {
+ DRM_DEV_ERROR(panel->dev,
+ "regulator_set_load failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret) {
+ DRM_DEV_ERROR(panel->dev, "regulator_bulk_disable failed %d\n",
+ ret);
+ }
+ return ret;
+}
+
+static int lg_panel_unprepare(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int ret, i;
+
+ if (!ctx->prepared)
+ return 0;
+
+ ret = mipi_dsi_dcs_set_display_off(ctx->link);
+ if (ret < 0) {
+ DRM_DEV_ERROR(panel->dev,
+ "set_display_off cmd failed ret = %d\n", ret);
+ }
+
+ msleep(120);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(ctx->link);
+ if (ret < 0) {
+ DRM_DEV_ERROR(panel->dev, "enter_sleep cmd failed ret = %d\n",
+ ret);
+ }
+
+ /* Would call panel_power_off() */
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+ ret = regulator_set_load(ctx->supplies[i].consumer,
+ regulator_disable_loads[i]);
+ if (ret) {
+ DRM_DEV_ERROR(panel->dev,
+ "regulator_set_load failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ ctx->prepared = false;
+
+ return ret;
+}
+
+static int lg_panel_prepare(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int err, i;
+
+ if (ctx->prepared)
+ return 0;
+
+ /* Would call panel_reset() */
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
+ err = regulator_set_load(ctx->supplies[i].consumer,
+ regulator_enable_loads[i]);
+ if (err)
+ return err;
+ }
+
+ err = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (err < 0)
+ return err;
+
+ usleep_range(9000, 10000);
+
+ err = mipi_dsi_dcs_write(ctx->link, MIPI_DCS_SET_GAMMA_CURVE,
+ (u8[]){ 0x02 }, 1);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to set gamma curve: %d\n",
+ err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_set_tear_on(ctx->link,
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to set tear on: %d\n", err);
+ goto poweroff;
+ }
+
+ err = send_mipi_cmds(panel, &lg_sw43408_on_cmds_1[0]);
+
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev,
+ "failed to send DCS Init 1st Code: %d\n", err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_exit_sleep_mode(ctx->link);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
+ err);
+ goto poweroff;
+ }
+
+ msleep(135);
+
+ err = mipi_dsi_dcs_write(ctx->link, MIPI_DSI_COMPRESSION_MODE,
+ (u8[]){ 0x11 }, 0);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev,
+ "failed to set compression mode: %d\n", err);
+ goto poweroff;
+ }
+
+ err = send_mipi_cmds(panel, &lg_sw43408_on_cmds_2[0]);
+
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev,
+ "failed to send DCS Init 2nd Code: %d\n", err);
+ goto poweroff;
+ }
+
+ err = mipi_dsi_dcs_set_display_on(ctx->link);
+ if (err < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to Set Display ON: %d\n",
+ err);
+ goto poweroff;
+ }
+
+ msleep(120);
+
+ ctx->prepared = true;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return err;
+}
+
+static int lg_panel_enable(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ struct drm_dsc_picture_parameter_set pps;
+ int ret;
+
+ if (ctx->enabled)
+ return 0;
+
+ ret = backlight_enable(ctx->backlight);
+ if (ret) {
+ DRM_DEV_ERROR(panel->dev, "Failed to enable backlight %d\n",
+ ret);
+ return ret;
+ }
+
+ if (!panel->dsc) {
+ DRM_DEV_ERROR(panel->dev, "Can't find DSC\n");
+ return -ENODEV;
+ }
+
+ drm_dsc_pps_payload_pack(&pps, panel->dsc);
+
+ ctx->enabled = true;
+
+ return 0;
+}
+
+static int lg_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ const struct drm_display_mode *m = ctx->mode;
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, m);
+ if (!mode) {
+ DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%u\n",
+ m->hdisplay, m->vdisplay);
+ return -ENOMEM;
+ }
+
+ connector->display_info.width_mm = m->width_mm;
+ connector->display_info.height_mm = m->height_mm;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static int lg_panel_backlight_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ int ret = 0;
+ uint16_t brightness;
+
+ brightness = (uint16_t)backlight_get_brightness(bl);
+ /* Brightness is sent in big-endian */
+ brightness = cpu_to_be16(brightness);
+
+ ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
+ return ret;
+}
+
+static int lg_panel_backlight_get_brightness(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ int ret = 0;
+ u16 brightness = 0;
+
+ ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
+ if (ret < 0)
+ return ret;
+
+ return brightness & 0xff;
+}
+
+const struct backlight_ops lg_panel_backlight_ops = {
+ .update_status = lg_panel_backlight_update_status,
+ .get_brightness = lg_panel_backlight_get_brightness,
+};
+
+static int lg_panel_backlight_init(struct sw43408_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_PLATFORM,
+ .brightness = 255,
+ .max_brightness = 255,
+ };
+
+ ctx->backlight = devm_backlight_device_register(dev, dev_name(dev), dev,
+ ctx->link,
+ &lg_panel_backlight_ops,
+ &props);
+
+ if (IS_ERR(ctx->backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->backlight),
+ "Failed to create backlight\n");
+
+ return 0;
+}
+
+static const struct drm_panel_funcs panel_funcs = {
+ .disable = lg_panel_disable,
+ .unprepare = lg_panel_unprepare,
+ .prepare = lg_panel_prepare,
+ .enable = lg_panel_enable,
+ .get_modes = lg_panel_get_modes,
+};
+
+static const struct drm_display_mode sw43408_default_mode = {
+ .clock = 152340,
+
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 32,
+ .htotal = 1080 + 20 + 32 + 20,
+
+ .vdisplay = 2160,
+ .vsync_start = 2160 + 20,
+ .vsync_end = 2160 + 20 + 4,
+ .vtotal = 2160 + 20 + 4 + 20,
+
+ .width_mm = 62,
+ .height_mm = 124,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct of_device_id panel_of_match[] = {
+ { .compatible = "lg,sw43408", .data = &sw43408_default_mode },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, panel_of_match);
+
+static int panel_add(struct sw43408_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+ ctx->supplies[i].supply = regulator_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
+ PTR_ERR(ctx->reset_gpio));
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ ret = lg_panel_backlight_init(ctx);
+ if (ret < 0)
+ return ret;
+
+ drm_panel_init(&ctx->base, dev, &panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ drm_panel_add(&ctx->base);
+ return ret;
+}
+
+static int panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct sw43408_panel *ctx;
+ struct drm_dsc_config *dsc;
+ int err;
+
+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->mode = of_device_get_match_data(&dsi->dev);
+ dsi->mode_flags = MIPI_DSI_MODE_LPM;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->lanes = 4;
+
+ ctx->link = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ err = panel_add(ctx);
+ if (err < 0)
+ return err;
+
+ /* The panel is DSC panel only, set the dsc params */
+ dsc = devm_kzalloc(&dsi->dev, sizeof(*dsc), GFP_KERNEL);
+ if (!dsc)
+ return -ENOMEM;
+
+ dsc->dsc_version_major = 0x1;
+ dsc->dsc_version_minor = 0x1;
+
+ dsc->slice_height = 16;
+ dsc->slice_width = 540;
+ dsc->slice_count = 1;
+ dsc->bits_per_component = 8;
+ dsc->bits_per_pixel = 8;
+ dsc->block_pred_enable = true;
+
+ ctx->base.dsc = dsc;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct sw43408_panel *ctx = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = lg_panel_unprepare(&ctx->base);
+ if (err < 0)
+ DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
+ err);
+
+ err = lg_panel_disable(&ctx->base);
+ if (err < 0)
+ DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n", err);
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
+ err);
+
+ if (ctx->base.dev)
+ drm_panel_remove(&ctx->base);
+
+ return 0;
+}
+
+static struct mipi_dsi_driver panel_driver = {
+ .driver = {
+ .name = "panel-lg-sw43408",
+ .of_match_table = panel_of_match,
+ },
+ .probe = panel_probe,
+ .remove = panel_remove,
+};
+module_mipi_dsi_driver(panel_driver);
+
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@xxxxxxxxxx>");
+MODULE_DESCRIPTION("LG SW436408 MIPI-DSI LED panel");
+MODULE_LICENSE("GPL");
--
2.36.1