[PATCH 2/3] ARM: dts: lan966x: Disable can0 on pcb8291

[Horatiu Vultur]

On pcb8291, can0 and the network driver share some of the GPIOs so only
1 device can be active. Therefore disable can0 as we want to enable the
network driver.

Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/lan966x-pcb8291.dts | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index 02fbf7371a8d..2cb532aa33f0 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -30,18 +30,6 @@ fc3_b_pins: fc3-b-pins {
 		pins = "GPIO_52", "GPIO_53";
 		function = "fc3_b";
 	};
-
-	can0_b_pins:  can0-b-pins {
-		/* RX, TX */
-		pins = "GPIO_35", "GPIO_36";
-		function = "can0_b";
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_b_pins>;
-	pinctrl-names = "default";
-	status = "okay";
 };
 
 &flx3 {
-- 
2.33.0