Re: [PATCH 4/4] cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1

[Daniel Lezcano]

On 22/06/2022 16:58, Lukasz Luba wrote:
> The SCMI v3.1 adds support for power values in micro-Watts. They are not
> always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power
> must be converted conditionally before sending to Energy Model. Add the
> logic which handles the needed checks and conversions.
>
> Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx>
> ---
>   drivers/cpufreq/scmi-cpufreq.c | 15 ++++++++++-----
>   1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
> index bfd35583d653..513a071845c2 100644
> --- a/drivers/cpufreq/scmi-cpufreq.c
> +++ b/drivers/cpufreq/scmi-cpufreq.c
> @@ -100,7 +100,7 @@ static int __maybe_unused
>   scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power,
>   		   unsigned long *KHz)
>   {
> -	bool power_scale_mw = perf_ops->power_scale_mw_get(ph);
> +	enum scmi_power_scale power_scale = perf_ops->power_scale_get(ph);
>   	unsigned long Hz;
>   	int ret, domain;
>   
> @@ -114,8 +114,8 @@ scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power,
>   	if (ret)
>   		return ret;
>   
> -	/* Provide bigger resolution power to the Energy Model */
> -	if (power_scale_mw)
> +	/* Convert the power to uW if it is mW (ignore bogoW) */
> +	if (power_scale == SCMI_POWER_MILLIWATTS)
>   		*power *= MICROWATT_PER_MILLIWATT;
>   
>   	/* The EM framework specifies the frequency in KHz. */
> @@ -255,8 +255,9 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
>   static void scmi_cpufreq_register_em(struct cpufreq_policy *policy)
>   {
>   	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
> -	bool power_scale_mw = perf_ops->power_scale_mw_get(ph);
> +	enum scmi_power_scale power_scale = perf_ops->power_scale_get(ph);
>   	struct scmi_data *priv = policy->driver_data;
> +	bool em_power_scale = false;

Just pass 'false' to em_dev_register_perf_domain()

>   	/*
>   	 * This callback will be called for each policy, but we don't need to
> @@ -268,9 +269,13 @@ static void scmi_cpufreq_register_em(struct cpufreq_policy *policy)
>   	if (!priv->nr_opp)
>   		return;
>   
> +	if (power_scale == SCMI_POWER_MILLIWATTS
> +	    || power_scale == SCMI_POWER_MICROWATTS)
> +		em_power_scale = true;
> +
>   	em_dev_register_perf_domain(get_cpu_device(policy->cpu), priv->nr_opp,
>   				    &em_cb, priv->opp_shared_cpus,
> -				    power_scale_mw);
> +				    em_power_scale);
>   }
>   
>   static struct cpufreq_driver scmi_cpufreq_driver = {


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog