Re: [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts

[Andy Shevchenko]

On Mon, Jul 4, 2022 at 7:21 PM Marcus Folkesson
<marcus.folkesson@xxxxxxxxx> wrote:
>
> Make it possible to read values upon interrupts.
> Configure Data Ready Signal Output Pin to either HiZ or push-pull and
> use it as interrupt source.

...

> +               /*
> +                * The device generates interrupts as long as it is powered up.
> +                * Some platforms might not allow the option to power it down so
> +                * don't enable the interrupt to avoid extra load on the system

Missed period.

> +                */

-- 
With Best Regards,
Andy Shevchenko