[PATCH V3 20/20] OPP: Remove custom OPP helper support

From: Viresh Kumar
Date: Mon Jul 04 2022 - 08:10:51 EST

Next message: Viresh Kumar: "Re: [PATCH 5/8] OPP: Allow multiple clocks for a device"
Previous message: Viresh Kumar: "[PATCH V3 19/20] OPP: ti: Migrate to dev_pm_opp_set_config_regulators()"
In reply to: Viresh Kumar: "[PATCH V3 19/20] OPP: ti: Migrate to dev_pm_opp_set_config_regulators()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The only user of the custom helper is migrated to use
dev_pm_opp_set_config_regulators() interface. Remove the now unused
custom OPP helper support.

This cleans up _set_opp() and leaves a single code path to be used by
all users.

Tested-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/opp/core.c | 132 +----------------------------------------
drivers/opp/opp.h | 7 ---
include/linux/pm_opp.h | 51 ----------------
3 files changed, 2 insertions(+), 188 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 3a794bff2ba1..e74bdc134c5a 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -979,36 +979,6 @@ static int _set_opp_bw(const struct opp_table *opp_table,
return 0;
}

-static int _set_opp_custom(const struct opp_table *opp_table,
- struct device *dev, struct dev_pm_opp *opp,
- unsigned long freq)
-{
- struct dev_pm_set_opp_data *data = opp_table->set_opp_data;
- struct dev_pm_opp *old_opp = opp_table->current_opp;
- int size;
-
- /*
- * We support this only if dev_pm_opp_set_config() was called
- * earlier to set regulators.
- */
- if (opp_table->sod_supplies) {
- size = sizeof(*old_opp->supplies) * opp_table->regulator_count;
- memcpy(data->old_opp.supplies, old_opp->supplies, size);
- memcpy(data->new_opp.supplies, opp->supplies, size);
- data->regulator_count = opp_table->regulator_count;
- } else {
- data->regulator_count = 0;
- }
-
- data->regulators = opp_table->regulators;
- data->clk = opp_table->clk;
- data->dev = dev;
- data->old_opp.rate = old_opp->rate;
- data->new_opp.rate = freq;
-
- return opp_table->set_opp(data);
-}
-
static int _set_required_opp(struct device *dev, struct device *pd_dev,
struct dev_pm_opp *opp, int i)
{
@@ -1195,13 +1165,7 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
}
}

- if (opp_table->set_opp) {
- ret = _set_opp_custom(opp_table, dev, opp, freq);
- } else {
- /* Only frequency scaling */
- ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
- }
-
+ ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
if (ret)
return ret;

@@ -2065,7 +2029,6 @@ static void _opp_put_prop_name(struct opp_table *opp_table)
static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev,
const char * const names[])
{
- struct dev_pm_opp_supply *supplies;
const char * const *temp = names;
struct regulator *reg;
int count = 0, ret, i;
@@ -2101,20 +2064,6 @@ static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev,

opp_table->regulator_count = count;

- supplies = kmalloc_array(count * 2, sizeof(*supplies), GFP_KERNEL);
- if (!supplies) {
- ret = -ENOMEM;
- goto free_regulators;
- }
-
- mutex_lock(&opp_table->lock);
- opp_table->sod_supplies = supplies;
- if (opp_table->set_opp_data) {
- opp_table->set_opp_data->old_opp.supplies = supplies;
- opp_table->set_opp_data->new_opp.supplies = supplies + count;
- }
- mutex_unlock(&opp_table->lock);
-
/* Set generic config_regulators() for single regulators here */
if (count == 1)
opp_table->config_regulators = _opp_config_regulator_single;
@@ -2151,16 +2100,6 @@ static void _opp_put_regulators(struct opp_table *opp_table)
for (i = opp_table->regulator_count - 1; i >= 0; i--)
regulator_put(opp_table->regulators[i]);

- mutex_lock(&opp_table->lock);
- if (opp_table->set_opp_data) {
- opp_table->set_opp_data->old_opp.supplies = NULL;
- opp_table->set_opp_data->new_opp.supplies = NULL;
- }
-
- kfree(opp_table->sod_supplies);
- opp_table->sod_supplies = NULL;
- mutex_unlock(&opp_table->lock);
-
kfree(opp_table->regulators);
opp_table->regulators = NULL;
opp_table->regulator_count = -1;
@@ -2233,61 +2172,6 @@ static void _opp_put_clknames(struct opp_table *opp_table)
}
}

-/**
- * _opp_register_set_opp_helper() - Register custom set OPP helper
- * @dev: Device for which the helper is getting registered.
- * @set_opp: Custom set OPP helper.
- *
- * This is useful to support complex platforms (like platforms with multiple
- * regulators per device), instead of the generic OPP set rate helper.
- *
- * This must be called before any OPPs are initialized for the device.
- */
-static int _opp_register_set_opp_helper(struct opp_table *opp_table,
- struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data))
-{
- struct dev_pm_set_opp_data *data;
-
- /* Another CPU that shares the OPP table has set the helper ? */
- if (opp_table->set_opp)
- return 0;
-
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- mutex_lock(&opp_table->lock);
- opp_table->set_opp_data = data;
- if (opp_table->sod_supplies) {
- data->old_opp.supplies = opp_table->sod_supplies;
- data->new_opp.supplies = opp_table->sod_supplies +
- opp_table->regulator_count;
- }
- mutex_unlock(&opp_table->lock);
-
- opp_table->set_opp = set_opp;
-
- return 0;
-}
-
-/**
- * _opp_unregister_set_opp_helper() - Releases resources blocked for set_opp helper
- * @opp_table: OPP table returned from _opp_register_set_opp_helper().
- *
- * Release resources blocked for platform specific set_opp helper.
- */
-static void _opp_unregister_set_opp_helper(struct opp_table *opp_table)
-{
- if (opp_table->set_opp) {
- opp_table->set_opp = NULL;
-
- mutex_lock(&opp_table->lock);
- kfree(opp_table->set_opp_data);
- opp_table->set_opp_data = NULL;
- mutex_unlock(&opp_table->lock);
- }
-}
-
/**
* _opp_set_config_regulators_helper() - Register custom set regulator helper.
* @dev: Device for which the helper is getting registered.
@@ -2446,10 +2330,8 @@ static void _opp_clear_config(struct opp_config_data *data)
_opp_put_regulators(data->opp_table);
if (data->flags & OPP_CONFIG_SUPPORTED_HW)
_opp_put_supported_hw(data->opp_table);
- if (data->flags & OPP_CONFIG_REGULATOR_HELPER) {
+ if (data->flags & OPP_CONFIG_REGULATOR_HELPER)
_opp_put_config_regulators_helper(data->opp_table);
- _opp_unregister_set_opp_helper(data->opp_table);
- }
if (data->flags & OPP_CONFIG_PROP_NAME)
_opp_put_prop_name(data->opp_table);
if (data->flags & OPP_CONFIG_CLK)
@@ -2520,16 +2402,6 @@ int dev_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config)
data->flags |= OPP_CONFIG_PROP_NAME;
}

- /* Configure opp helper */
- if (config->set_opp) {
- ret = _opp_register_set_opp_helper(opp_table, dev,
- config->set_opp);
- if (ret)
- goto err;
-
- data->flags |= OPP_CONFIG_REGULATOR_HELPER;
- }
-
/* Configure config_regulators helper */
if (config->config_regulators) {
ret = _opp_set_config_regulators_helper(opp_table, dev,
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index 45fd40737159..13abe991e811 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -182,9 +182,6 @@ enum opp_table_access {
* @enabled: Set to true if the device's resources are enabled/configured.
* @genpd_performance_state: Device's power domain support performance state.
* @is_genpd: Marks if the OPP table belongs to a genpd.
- * @set_opp: Platform specific set_opp callback
- * @sod_supplies: Set opp data supplies
- * @set_opp_data: Data to be passed to set_opp callback
* @dentry: debugfs dentry pointer of the real device directory (not links).
* @dentry_name: Name of the real dentry.
*
@@ -234,10 +231,6 @@ struct opp_table {
bool genpd_performance_state;
bool is_genpd;

- int (*set_opp)(struct dev_pm_set_opp_data *data);
- struct dev_pm_opp_supply *sod_supplies;
- struct dev_pm_set_opp_data *set_opp_data;
-
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
char dentry_name[NAME_MAX];
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 1e2b33d79ba6..9d59aedc2be3 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -57,39 +57,6 @@ struct dev_pm_opp_icc_bw {
u32 peak;
};

-/**
- * struct dev_pm_opp_info - OPP freq/voltage/current values
- * @rate: Target clk rate in hz
- * @supplies: Array of voltage/current values for all power supplies
- *
- * This structure stores the freq/voltage/current values for a single OPP.
- */
-struct dev_pm_opp_info {
- unsigned long rate;
- struct dev_pm_opp_supply *supplies;
-};
-
-/**
- * struct dev_pm_set_opp_data - Set OPP data
- * @old_opp: Old OPP info
- * @new_opp: New OPP info
- * @regulators: Array of regulator pointers
- * @regulator_count: Number of regulators
- * @clk: Pointer to clk
- * @dev: Pointer to the struct device
- *
- * This structure contains all information required for setting an OPP.
- */
-struct dev_pm_set_opp_data {
- struct dev_pm_opp_info old_opp;
- struct dev_pm_opp_info new_opp;
-
- struct regulator **regulators;
- unsigned int regulator_count;
- struct clk *clk;
- struct device *dev;
-};
-
typedef int (*config_regulators_t)(struct device *dev,
struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp,
struct regulator **regulators, unsigned int count);
@@ -98,7 +65,6 @@ typedef int (*config_regulators_t)(struct device *dev,
* struct dev_pm_opp_config - Device OPP configuration values
* @clk_names: Clk names, NULL terminated array, max 1 clock for now.
* @prop_name: Name to postfix to properties.
- * @set_opp: Custom set OPP helper.
* @config_regulators: Custom set regulator helper.
* @supported_hw: Array of hierarchy of versions to match.
* @supported_hw_count: Number of elements in the array.
@@ -113,7 +79,6 @@ struct dev_pm_opp_config {
/* NULL terminated */
const char * const *clk_names;
const char *prop_name;
- int (*set_opp)(struct dev_pm_set_opp_data *data);
config_regulators_t config_regulators;
const unsigned int *supported_hw;
unsigned int supported_hw_count;
@@ -610,22 +575,6 @@ static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name)
return devm_pm_opp_set_config(dev, &config);
}

-/* set-opp helpers */
-static inline int dev_pm_opp_register_set_opp_helper(struct device *dev,
- int (*set_opp)(struct dev_pm_set_opp_data *data))
-{
- struct dev_pm_opp_config config = {
- .set_opp = set_opp,
- };
-
- return dev_pm_opp_set_config(dev, &config);
-}
-
-static inline void dev_pm_opp_unregister_set_opp_helper(int token)
-{
- dev_pm_opp_clear_config(token);
-}
-
/* config-regulators helpers */
static inline int dev_pm_opp_set_config_regulators(struct device *dev,
config_regulators_t helper)
--
2.31.1.272.g89b43f80a514

Next message: Viresh Kumar: "Re: [PATCH 5/8] OPP: Allow multiple clocks for a device"
Previous message: Viresh Kumar: "[PATCH V3 19/20] OPP: ti: Migrate to dev_pm_opp_set_config_regulators()"
In reply to: Viresh Kumar: "[PATCH V3 19/20] OPP: ti: Migrate to dev_pm_opp_set_config_regulators()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]