Re: [PATCH] ARM: dts: lan966x: Add mcan1 node.

[Claudiu.Beznea]

On 27.06.2022 14:05, Kavyasree Kotagiri wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Add the mcan1 node. By default, keep it disabled.
> 
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@xxxxxxxxxxxxx>

Applied to at91-dt, thanks!

> ---
>  arch/arm/boot/dts/lan966x.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
> index 3cb02fffe716..25cfa89dde7b 100644
> --- a/arch/arm/boot/dts/lan966x.dtsi
> +++ b/arch/arm/boot/dts/lan966x.dtsi
> @@ -473,6 +473,21 @@
>                         status = "disabled";
>                 };
> 
> +               can1: can@e0820000 {
> +                       compatible = "bosch,m_can";
> +                       reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
> +                       reg-names = "m_can", "message_ram";
> +                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "int0", "int1";
> +                       clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
> +                       clock-names = "hclk", "cclk";
> +                       assigned-clocks = <&clks GCK_ID_MCAN1>;
> +                       assigned-clock-rates = <40000000>;
> +                       bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
> +                       status = "disabled";
> +               };
> +
>                 reset: reset-controller@e200400c {
>                         compatible = "microchip,lan966x-switch-reset";
>                         reg = <0xe200400c 0x4>;
> --
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel