[PATCH 6/9] arm64: dts: uniphier: Add ahci controller and glue layer nodes for PXs3

From: Kunihiko Hayashi
Date: Sun Jul 03 2022 - 20:22:45 EST


Add ahci controller and glue layer nodes including reset and phy.
This supports for PXs3 and the boards.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
.../boot/dts/socionext/uniphier-pxs3-ref.dts | 8 ++
.../boot/dts/socionext/uniphier-pxs3.dtsi | 80 +++++++++++++++++++
2 files changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 506c7b9ff50d..1ced6190ab2b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -137,6 +137,14 @@ nand@0 {
};
};

+&ahci0 {
+ status = "okay";
+};
+
+&ahci1 {
+ status = "okay";
+};
+
&pinctrl_ether_rgmii {
tx {
pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 7304dee2e504..f49a8db3e918 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -596,6 +596,86 @@ mdio1: mdio {
};
};

+ ahci0: ahci@65600000 {
+ compatible = "socionext,uniphier-pxs3-ahci",
+ "generic-ahci";
+ status = "disabled";
+ reg = <0x65600000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clk 28>;
+ resets = <&sys_rst 28>, <&ahci0_rst 0>;
+ ports-implemented = <1>;
+ phys = <&ahci0_phy>;
+ };
+
+ ahci-glue@65700000 {
+ compatible = "socionext,uniphier-pxs3-ahci-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65700000 0x100>;
+
+ ahci0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-ahci-reset";
+ reg = <0x0 0x4>;
+ clock-names = "link";
+ clocks = <&sys_clk 28>;
+ reset-names = "link";
+ resets = <&sys_rst 28>;
+ #reset-cells = <1>;
+ };
+
+ ahci0_phy: phy@10 {
+ compatible = "socionext,uniphier-pxs3-ahci-phy";
+ reg = <0x10 0x10>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 28>, <&sys_clk 30>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 28>, <&sys_rst 30>;
+ #phy-cells = <0>;
+ };
+ };
+
+ ahci1: ahci@65800000 {
+ compatible = "socionext,uniphier-pxs3-ahci",
+ "generic-ahci";
+ status = "disabled";
+ reg = <0x65800000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clk 29>;
+ resets = <&sys_rst 29>, <&ahci1_rst 0>;
+ ports-implemented = <1>;
+ phys = <&ahci1_phy>;
+ };
+
+ ahci-glue@65900000 {
+ compatible = "socionext,uniphier-pxs3-ahci-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65900000 0x100>;
+
+ ahci1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-ahci-reset";
+ reg = <0x0 0x4>;
+ clock-names = "link";
+ clocks = <&sys_clk 29>;
+ reset-names = "link";
+ resets = <&sys_rst 29>;
+ #reset-cells = <1>;
+ };
+
+ ahci1_phy: phy@10 {
+ compatible = "socionext,uniphier-pxs3-ahci-phy";
+ reg = <0x10 0x10>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 29>, <&sys_clk 30>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 29>, <&sys_rst 30>;
+ #phy-cells = <0>;
+ };
+ };
+
usb0: usb@65a00000 {
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
--
2.25.1