Re: [PATCH v5 06/15] dt-bindings: mfd: amd,pensando-elbasr: Add AMD Pensando Elba System Resource chip

[Brad Larson]

Hi Rob,

On Tue, Jun 14, 2022 at 2:30 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Mon, Jun 13, 2022 at 12:56:49PM -0700, Brad Larson wrote:
> > From: Brad Larson <blarson@xxxxxxx>
> >
> > Add support for the AMD Pensando Elba SoC System Resource chip
> > using the SPI interface.  The Elba SR is a Multi-function Device
> > supporting device register access using CS0, smbus interface for
> > FRU and board peripherals using CS1, dual Lattice I2C masters for
> > transceiver management using CS2, and CS3 for flash access.
> >
> > Signed-off-by: Brad Larson <blarson@xxxxxxx>
> > ---
> >  .../bindings/mfd/amd,pensando-elbasr.yaml     | 93 +++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> > new file mode 100644
> > index 000000000000..13356800b1cf
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/amd,pensando-elbasr.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: AMD Pensando Elba SoC Resource Controller bindings
> ...
> > +patternProperties:
> > +  '^reset-controller@[a-f0-9]+$':
> > +    $ref: ../reset/amd,pensando-elbasr-reset.yaml
>
> /schemas/reset/...

Changed it to
       $ref: /schemas/reset/amd,pensando-elbasr-reset.yaml

> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/reset/amd,pensando-elba-reset.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    spi0 {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        num-cs = <4>;
> > +
> > +        spi@0 {
> > +          compatible = "amd,pensando-elbasr", "simple-mfd";
> > +          reg = <0>;
> > +          #address-cells = <1>;
> > +          #size-cells = <0>;
> > +          spi-max-frequency = <12000000>;
> > +
> > +          rstc: reset-controller@0 {
>
> Only one child does not make a MFD...

Looking over the approaches for other SoCs with an external
required controller (cpld, fpga) this appeared to be an
acceptable choice.  This device is accessed by several
different utilities/programs via /dev/pensr0.x, CS0 registers
for a variety of control/status, CS1 designware i2c master/slave,
CS2 lattice dual i2c masters, and CS3 for flash.

> > +            compatible = "amd,pensando-elbasr-reset";
> > +            reg = <0>;
> > +            #reset-cells = <1>;
> > +          };
> > +        };
> > +
> > +        spi@1 {
> > +          compatible = "amd,pensando-elbasr", "simple-mfd";
> > +          reg = <1>;
> > +          spi-max-frequency = <12000000>;
>
> 'simple-mfd' implies there are child nodes, but you have none. Is this
> complete?

This function is a designware i2c master/slave for board peripheral
access.  Removed simple-mfd.

> > +        };
> > +
> > +        spi@2 {
> > +          compatible = "amd,pensando-elbasr", "simple-mfd";
> > +          reg = <2>;
> > +          spi-max-frequency = <12000000>;
> > +          interrupt-parent = <&porta>;
> > +          interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>
> This one has interrupt but the others don't?

Yes, this function is a Lattice dual I2C master for transceiver
management.  The spi to i2c driver is not included in this patch set for
essential Elba SoC support.  Removed simple-mfd.

Regards,
Brad