Re: [PATCH v1 2/2] gpio: adnp: Make use of device properties
From: Bartosz Golaszewski
Date: Fri Jul 01 2022 - 05:37:55 EST
On Tue, Jun 28, 2022 at 9:59 PM Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
> drivers/gpio/gpio-adnp.c | 14 +++++---------
> 1 file changed, 5 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
> index 075782831044..a6439e3daff0 100644
> --- a/drivers/gpio/gpio-adnp.c
> +++ b/drivers/gpio/gpio-adnp.c
> @@ -6,8 +6,9 @@
> #include <linux/gpio/driver.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/module.h>
> -#include <linux/of_irq.h>
> +#include <linux/property.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
>
> @@ -487,19 +488,15 @@ static int adnp_gpio_setup(struct adnp *adnp, unsigned int num_gpios,
>
> static int adnp_i2c_probe(struct i2c_client *client)
> {
> - struct device_node *np = client->dev.of_node;
> + struct device *dev = &client->dev;
> struct adnp *adnp;
> u32 num_gpios;
> int err;
>
> - err = of_property_read_u32(np, "nr-gpios", &num_gpios);
> + err = device_property_read_u32(dev, "nr-gpios", &num_gpios);
> if (err < 0)
> return err;
>
> - client->irq = irq_of_parse_and_map(np, 0);
> - if (!client->irq)
> - return -EPROBE_DEFER;
> -
> adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL);
> if (!adnp)
> return -ENOMEM;
> @@ -507,8 +504,7 @@ static int adnp_i2c_probe(struct i2c_client *client)
> mutex_init(&adnp->i2c_lock);
> adnp->client = client;
>
> - err = adnp_gpio_setup(adnp, num_gpios,
> - of_property_read_bool(np, "interrupt-controller"));
> + err = adnp_gpio_setup(adnp, num_gpios, device_property_read_bool(dev, "interrupt-controller"));
> if (err)
> return err;
>
> --
> 2.35.1
>
Applied, thanks!
Bart