Re: [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family

[Krzysztof Kozlowski]

On 01/07/2022 08:38, Krzysztof Kozlowski wrote:
> On 01/07/2022 06:29, Nishanth Menon wrote:
>> The adcxx4s communicates with a host processor via an SPI/Microwire Bus
>> interface. The device family responds with 12bit data, of which the LSB
>> bits are 0 for the lower resolution devices. I have been able to test
>> adc102s051, hence adding just the missing ones in that family.
>>
>> Lets reuse the binding to support the family of devices with name
>> ADC<bb><c>S<sss>, where
>> * bb is the resolution in number of bits (8, 10, 12)
>> * c is the number of channels (1, 2, 4, 8)
>> * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
>>   and 101 for 1 MSPS)
>>
>> Complete datasheets are available at TI's website here:
>>   https://www.ti.com/lit/gpn/adc<bb><c>s<sss>.pdf
>>
>> Handling of 8, 10 and 12 bits converters are the same, the
>> unavailable bits are 0 in LSB :)
>>
>> Inspired-by: drivers/hwmon/adcxx.c
>>
>> Signed-off-by: Nishanth Menon <nm@xxxxxx>
>> ---
>>
>> Checkpatch does complain with Inspired-by: insisting it to be an email
>> address.. but I was really inspired by the hwmon driver.. Don't know
>> what else to say here.. we could probably drop it?
> 
> Drop it or convert to just test.

This should be:

Drop it or convert to just text sentence.

Best regards,
Krzysztof