[PATCH v3 1/3] dt-bindings: usb: dwc3: Add support for multiport related properties

[Harsh Agarwal]

Added support for multiport, mport, num_usb2_phy and num_usb3_phy
properties. These properties are used to support devices having
a multiport controller.

Signed-off-by: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
---
 .../devicetree/bindings/usb/snps,dwc3.yaml         | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index d41265b..9332fa2 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -343,6 +343,32 @@ properties:
       This port is used with the 'usb-role-switch' property  to connect the
       dwc3 to type C connector.
 
+  multiport:
+    description:
+      If a single USB controller supports multiple ports, then it's referred to as
+      a multiport controller. Each port of the multiport controller can support
+      either High Speed or Super Speed or both and have their own PHY phandles. Each
+      port is represented by "mport" node and all the "mport" nodes are grouped
+      together inside the "multiport" node where individual "mport" node defines the
+      PHYs supported by that port.
+
+  num_usb2_phy:
+    description: Total number of HS-PHYs defined by the multiport controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  num_usb3_phy:
+    description: Total number of SS-PHYs defined by the multiport controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  mport:
+    description: Each mport node represents one port of the multiport controller.
+    oneOf:
+      - required:
+        - usb-phy
+      - required:
+        - phys
+        - phy-names
+
 unevaluatedProperties: false
 
 required:
@@ -371,4 +397,31 @@ examples:
       snps,dis_u2_susphy_quirk;
       snps,dis_enblslpm_quirk;
     };
+  - |
+    usb@4a000000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a000000 0xcfff>;
+      interrupts = <0 92 4>;
+
+      multiport {
+
+        MP_1: mport1 {
+          usb-phy = <&usb2_phy0>, <&usb3_phy0>;
+          /* Can define Generic PHYs also */
+        };
+
+        MP_2: mport2 {
+          usb-phy = <&usb2_phy1>, <&usb3_phy1>;
+        };
+
+        MP_3: mport3 {
+          usb-phy = <&usb2_phy2>;
+        };
+
+        MP_4: mport4 {
+          usb-phy = <&usb2_phy3>;
+        };
+
+      };
+    };
 ...
-- 
2.7.4