Re: [PATCH v6 0/5] i2c: npcm: Bug fixes timeout, spurious interrupts

From: Tyrone Ting
Date: Thu May 26 2022 - 20:31:19 EST


Hi Andy:

Thank you for your review.

Much appreciated.

Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> 於 2022年5月26日 週四 上午1:32寫道:
>
> On Wed, May 25, 2022 at 11:23:36AM +0800, Tyrone Ting wrote:
> > From: Tyrone Ting <kfting@xxxxxxxxxxx>
> >
> > This patchset includes the following fixes:
> >
> > - Add dt-bindings description for NPCM845.
> > - Bug fix for timeout calculation.
> > - Better handling of spurious interrupts.
> > - Fix for event type in slave mode.
> > - Removal of own slave addresses [2:10].
> > - Support for next gen BMC (NPCM845).
> >
> > The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards.
>
> LGTM,
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>
> > Addressed comments from:
> > - Wolfram Sang : https://lkml.org/lkml/2022/5/21/51
> >
> > Changes since version 5:
> > - Shorten npcm_i2caddr array since the number of supported i2c slave
> > addresses is reduced.
> > - Create a new patch from the original PATCH v5 08/10 to modify the slave
> > transaction logic.
> >
> > Changes since version 4:
> > - Remove quotes around ref handle to nuvoton,sys-mgr in i2c binding
> > document.
> > - Keep the "longer line first" order.
> > - Correct the SoB chain.
> > - Modify the if statement in one line and add new line characters.
> > - Modify the commit message format in the patch Remove own slave
> > addresses 2:10. Correct the if statement in one line and shorten the
> > debug messages.
> > - Create a new patch to capitalize the one-line comment in the driver.
> >
> > Changes since version 3:
> > - Correct the const format in if condition in i2c binding document.
> > - Add the oops message statement and register information in register
> > access width patch.
> > - Add the occurring rate of the i2c spurious interrupt issue and more
> > details in driver's behavior to overcome this issue.
> > - Address Andy's comments in the patch to support NPCM845.
> >
> > Changes since version 2:
> > - Keep old code as fallback, if getting nuvoton,sys-mgr property fails.
> > - Fix the error reported by running 'make DT_CHECKER_FLAGS=-m
> > dt_binding_check'.
> > - Make nuvoton,sys-mgr required for nuvoton,npcm845-i2c.
> > - Correct the patch's subject about changing the way of getting GCR
> > regmap and add the description about keeping old code as fallback
> > if getting nuvoton,sys-mgr property fails.
> > - Correct the patch title and description about removing the unused
> > variable clk_regmap.
> > - Use the data field directly instead of the macros since macros are
> > not constants anymore in this patch.
> >
> > Changes since version 1:
> > - Add nuvoton,sys-mgr property in NPCM devicetree.
> > - Describe the commit message in imperative mood.
> > - Modify the description in i2c binding document to cover NPCM series.
> > - Add new property in i2c binding document.
> > - Create a new patch for client address calculation.
> > - Create a new patch for updating gcr property name.
> > - Create a new patch for removing unused clock node.
> > - Explain EOB in the commit description.
> > - Create a new patch for correcting NPCM register access width.
> > - Remove some comment since the corresponding logic no longer exists.
> > - Remove fixes tag while the patch adds an additional feature.
> > - Use devicetree data field to support NPCM845.
> >
> > Tali Perry (2):
> > i2c: npcm: Remove own slave addresses 2:10
> > i2c: npcm: Correct slave role behavior
> >
> > Tyrone Ting (3):
> > dt-bindings: i2c: npcm: support NPCM845
> > i2c: npcm: Support NPCM845
> > i2c: npcm: Capitalize the one-line comment
> >
> > .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 25 ++-
> > drivers/i2c/busses/Kconfig | 8 +-
> > drivers/i2c/busses/Makefile | 2 +-
> > drivers/i2c/busses/i2c-npcm7xx.c | 176 ++++++++++--------
> > 4 files changed, 124 insertions(+), 87 deletions(-)
> >
> > --
> > 2.17.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

Best Regards,
Tyrone