Re: [PATCH v2 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver

[Dmitry Rokosov]

Hello Jonathan and Rob,

I didn't change two places which you mentioned in the v1 review, please
find my comments below.

On Wed, May 25, 2022 at 06:15:33PM +0000, Dmitry Rokosov wrote:

> +  interrupt-names:
> +    const: irq
I stay interrupt-names node here, because otherwise dt_binding_check
command shows such a warning:

====
  CHECK   Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: accelerometer@62: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
====

I can't delete this node from the example as well, because it's required for
msa311 dts i2c irq declaration.

Please help me to resolve this problem properly if possible. If we can
ignore such warning I'll delete interrupt-names in the next patchset's
version.

> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
Properties #address-cells and #size-cells are still located in the
schema example, because otherwise dt_binding_check raises the below 
warnings if we delete these properties:

=====
  DTC     Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dts:27.17-30: Warning (reg_format): /example-0/i2c/accelerometer@62:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dts:24.13-32.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dts:24.13-32.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dts:25.30-31.15: Warning (avoid_default_addr_size): /example-0/i2c/accelerometer@62: Relying on default #address-cells value
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dts:25.30-31.15: Warning (avoid_default_addr_size): /example-0/i2c/accelerometer@62: Relying on default #size-cells value
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.example.dt.yaml: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
=====

What is best way to resolve such issues without providing #address-cells
and #size-cells values?

-- 
Thank you,
Dmitry