[PATCH 32/40] hwmon: (lm90) Add explicit support for NCT210

[Guenter Roeck]

Unlike ADM1023 and compatible chips, NCT210 does not support a temperature
offset register. A real chip was found to have a chip revision of 0x3f.
Use it to detect NCT210 explicitly.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
 Documentation/hwmon/lm90.rst | 14 ++++++++++++++
 drivers/hwmon/Kconfig        |  2 +-
 drivers/hwmon/lm90.c         | 18 ++++++++++++++++--
 3 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst
index dfbdfe11606e..e9a8c11eba8b 100644
--- a/Documentation/hwmon/lm90.rst
+++ b/Documentation/hwmon/lm90.rst
@@ -137,6 +137,16 @@ Supported chips:
 
 	       https://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
 
+  * ON Semiconductor NCT210
+
+    Prefix: 'adm1021'
+
+    Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+    Datasheet: Publicly available at the ON Semiconductor website
+
+	       https://www.onsemi.com/PowerSolutions/product.do?id=NCT210
+
   * Maxim MAX1617
 
     Prefix: 'max1617'
@@ -421,6 +431,10 @@ ADM1021, GL523SM, MAX1617, NE1617, NE1617A, THMC10:
   * 8 bit sensor resolution
   * Low temperature limits
 
+NCT210:
+  * 11 bit sensor resolution for remote temperature sensor
+  * Low temperature limits
+
 ADM1021A, ADM1023:
   * Temperature offset register for remote temperature sensor
   * 11 bit resolution for remote temperature sensor
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bb952287fcee..d30ea2fea3e2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1365,7 +1365,7 @@ config SENSORS_LM90
 	  Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
 	  MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
 	  MAX6696,
-	  ON Semiconductor NCT1008, Winbond/Nuvoton W83L771W/G/AWG/ASG,
+	  ON Semiconductor NCT1008, NCT210, Winbond/Nuvoton W83L771W/G/AWG/ASG,
 	  Philips SA56004, GMT G781, Texas Instruments TMP451 and TMP461
 	  sensor chips.
 
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 16481051a530..4ae8027722e0 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -125,7 +125,7 @@ static const unsigned short normal_i2c[] = {
 enum chips { adm1023, adm1032, adt7461, adt7461a, adt7481,
 	g781, lm84, lm90, lm99,
 	max1617, max6642, max6646, max6648, max6654, max6657, max6659, max6680, max6696,
-	sa56004, tmp451, tmp461, w83l771,
+	nct210, sa56004, tmp451, tmp461, w83l771,
 };
 
 /*
@@ -257,6 +257,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "max6696", max6696 },
 	{ "mc1066", max1617 },
 	{ "nct1008", adt7461a },
+	{ "nct210", nct210 },
 	{ "w83l771", w83l771 },
 	{ "sa56004", sa56004 },
 	{ "thmc10", max1617 },
@@ -533,6 +534,14 @@ static const struct lm90_params lm90_params[] = {
 		.reg_status2 = MAX6696_REG_STATUS2,
 		.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
 	},
+	[nct210] = {
+		.flags = LM90_HAVE_ALARMS | LM90_HAVE_BROKEN_ALERT
+		  | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
+		  | LM90_HAVE_REMOTE_EXT,
+		.alert_alarms = 0x7c,
+		.resolution = 11,
+		.max_convrate = 7,
+	},
 	[w83l771] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
 		  | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
@@ -1766,7 +1775,7 @@ static const char *lm90_detect_analog(struct i2c_client *client, bool common_add
 		    !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
 			name = "adm1021";
 		break;
-	case 0x30 ... 0x3f:	/* ADM1021A, ADM1023 */
+	case 0x30 ... 0x3e:	/* ADM1021A, ADM1023 */
 		/*
 		 * ADM1021A and compatible chips will be mis-detected as
 		 * ADM1023. Chips labeled 'ADM1021A' and 'ADM1023' were both
@@ -1784,6 +1793,11 @@ static const char *lm90_detect_analog(struct i2c_client *client, bool common_add
 		    !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
 			name = "adm1023";
 		break;
+	case 0x3f:		/* NCT210 */
+		if (man_id2 == 0x00 && chip_id2 == 0x00 && common_address &&
+		    !(status & 0x03) && !(config1 & 0x3f) && !(convrate & 0xf8))
+			name = "nct210";
+		break;
 	case 0x40 ... 0x4f:	/* ADM1032 */
 		if (man_id2 == 0x00 && chip_id2 == 0x00 &&
 		    (address == 0x4c || address == 0x4d) && !(config1 & 0x3f) &&
-- 
2.35.1