[PATCH] HID: ft260: fix multi packet i2c transactions

From: Guillaume Champagne
Date: Tue May 24 2022 - 15:27:30 EST


Only trigger START and STOP conditions for the first and last HID
packets when i2c writes are split in multiple packets. Otherwise, slave
i2c devices receive each packet as standalone i2c transactions. Since
i2c slave devices clear their internal state on STOP, this breaks auto
increment of the register address written to.

Concretely, SCL is now held low between processing of HID packets so i2c
slave devices know to keep increment the same register address when the
next bytes arrive.

Co-developed-by: Mathieu Gallichand <mathieu.gallichand@xxxxxxxxxxxx>
Signed-off-by: Mathieu Gallichand <mathieu.gallichand@xxxxxxxxxxxx>
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@xxxxxxxxx>
---
drivers/hid/hid-ft260.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 79505c64dbfe..9c5912a21ccb 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -390,6 +390,8 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
struct hid_device *hdev = dev->hdev;
struct ft260_i2c_write_request_report *rep =
(struct ft260_i2c_write_request_report *)dev->write_buf;
+ bool multi_packet = data_len > FT260_WR_DATA_MAX;
+ u8 packet_flag = multi_packet ? flag & FT260_FLAG_START_REPEATED : flag;

do {
if (data_len <= FT260_WR_DATA_MAX)
@@ -400,7 +402,7 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
rep->report = FT260_I2C_DATA_REPORT_ID(len);
rep->address = addr;
rep->length = len;
- rep->flag = flag;
+ rep->flag = packet_flag;

memcpy(rep->data, &data[idx], len);

@@ -418,6 +420,12 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
data_len -= len;
idx += len;

+ if (multi_packet) {
+ if (data_len <= FT260_WR_DATA_MAX)
+ packet_flag = flag & FT260_FLAG_STOP;
+ else
+ packet_flag = FT260_FLAG_NONE;
+ }
} while (data_len > 0);

return 0;
--
2.20.1