Re: [PATCH 1/2] dt-bindings: leds: lp50xx: correct reg/unit addresses in example

From: Krzysztof Kozlowski
Date: Tue May 24 2022 - 02:36:31 EST


On 23/05/2022 23:35, Rob Herring wrote:
> On Wed, May 18, 2022 at 10:22:14AM +0200, Krzysztof Kozlowski wrote:
>> The multi-led node defined address/size cells, so it intended to have
>> children with unit addresses.
>>
>> The second multi-led's reg property defined three LED indexes within one
>> reg item, which is not correct - these are three separate items.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>>
>> ---
>>
>> Cc: Kyle Swenson <kyle.swenson@xxxxxxxx>
>> ---
>> .../devicetree/bindings/leds/leds-lp50xx.yaml | 22 ++++++++++++-------
>> 1 file changed, 14 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
>> index f12fe5b53f30..dc1ac905bb91 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
>> @@ -99,35 +99,41 @@ examples:
>> color = <LED_COLOR_ID_RGB>;
>> function = LED_FUNCTION_CHARGING;
>>
>> - led-0 {
>> + led@0 {
>> + reg = <0x0>;
>> color = <LED_COLOR_ID_RED>;
>> };
>>
>> - led-1 {
>> + led@1 {
>> + reg = <0x1>;
>> color = <LED_COLOR_ID_GREEN>;
>> };
>>
>> - led-2 {
>> + led@2 {
>> + reg = <0x2>;
>> color = <LED_COLOR_ID_BLUE>;
>> };
>> };
>>
>> multi-led@2 {
>> #address-cells = <1>;
>> - #size-cells = <2>;
>> - reg = <0x2 0x3 0x5>;
>> + #size-cells = <0>;
>> + reg = <0x3>, <0x4>, <0x5>;
>
> The unit-address is 2, but the reg value is 3?

Right, the multi-led should be also @3 to match the reg and first led in
children.

Thanks.


Best regards,
Krzysztof