Re: [PATCH v1 1/2] Revert "drm/bridge: anx7625: Use DPI bus type"

From: Daniel Vetter
Date: Mon May 23 2022 - 12:06:17 EST


On Mon, 23 May 2022 at 14:54, Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> These two patches need to be reverted since they were part (3/4 & 4/4)
> of a series, that was partially (1/4 + 2/4) on the linux-media tree.
> These two patches depend on the patches in the media tree, and will
> not build without them, which leaves linux-drm-misc-next in a broken
> state. Let's revert the two latter patches until rc1 has been branched

"rc1 has been backmerged into drm-misc-next" is missing here.

> and the dependency wont cause issues any more.

With explainer and sob added to both:

Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

>
> On Mon, 23 May 2022 at 14:50, Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> >
> > On Mon, 23 May 2022 at 10:46, Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> > >
> > > This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1.
> > > ---
> > > drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
> > > 1 file changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > index 01f46d9189c1..53a5da6c49dd 100644
> > > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > @@ -1623,14 +1623,14 @@ static int anx7625_parse_dt(struct device *dev,
> > >
> > > anx7625_get_swing_setting(dev, pdata);
> > >
> > > - pdata->is_dpi = 0; /* default dsi mode */
> > > + pdata->is_dpi = 1; /* default dpi mode */
> > > pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> > > if (!pdata->mipi_host_node) {
> > > DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> > > return -ENODEV;
> > > }
> > >
> > > - bus_type = 0;
> > > + bus_type = V4L2_FWNODE_BUS_TYPE_PARALLEL;
> > > mipi_lanes = MAX_LANES_SUPPORT;
> > > ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
> > > if (ep0) {
> > > @@ -1640,8 +1640,8 @@ static int anx7625_parse_dt(struct device *dev,
> > > mipi_lanes = of_property_count_u32_elems(ep0, "data-lanes");
> > > }
> > >
> > > - if (bus_type == V4L2_FWNODE_BUS_TYPE_DPI) /* bus type is DPI */
> > > - pdata->is_dpi = 1;
> > > + if (bus_type == V4L2_FWNODE_BUS_TYPE_PARALLEL) /* bus type is Parallel(DSI) */
> > > + pdata->is_dpi = 0;
> > >
> > > pdata->mipi_lanes = mipi_lanes;
> > > if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> > > --
> > > 2.34.1
> > >
> >
> > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>



--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch