RE: [RESEND PATCH v1] scsi: ufs: Change the shutting_down flag setting position

[Hoyoung SEO]

> -----Original Message-----
> From: SEO HOYOUNG [mailto:hy50.seo@xxxxxxxxxxx]
> Sent: Monday, May 23, 2022 2:19 AM
> To: linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> alim.akhtar@xxxxxxxxxxx; avri.altman@xxxxxxx; jejb@xxxxxxxxxxxxx;
> martin.petersen@xxxxxxxxxx; beanhuo@xxxxxxxxxx; asutoshd@xxxxxxxxxxxxxx;
> cang@xxxxxxxxxxxxxx; bvanassche@xxxxxxx; bhoon95.kim@xxxxxxxxxxx;
> kwmad.kim@xxxxxxxxxxx
> Cc: SEO HOYOUNG
> Subject: [RESEND PATCH v1] scsi: ufs: Change the shutting_down flag
> setting position
> 
> When System shutdown, will called ufshcd_wl_shutdown().
> Then the shutting_down falg set to 1 at ufshcd_wl_shutdown().
> And send to SSU cmd at ufshcd_wl_shutdown()->__ufshcd_wl_suspend()->
> ufshcd_set_dev_pwr_mode() function.
> 
> If occurred fail during send SSU cmd,
> then will called ufshcd_err_handler for recovery.
> But already set shutting_down to 1, so ufs driver could not recovery.
> Then System wait for SSU cmd to be completed and eventaully it will tak
> Hang.
> So changed the position where shutting_down is set.
> 
> Signed-off-by: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
> ---
>  drivers/scsi/ufs/ufshcd.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index
> 1fb3a8b9b03e..65d47cd5afbe 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -9235,10 +9235,6 @@ static void ufshcd_wl_shutdown(struct device *dev)
> 
>  	hba = shost_priv(sdev->host);
> 
> -	down(&hba->host_sem);
> -	hba->shutting_down = true;
> -	up(&hba->host_sem);
> -
>  	/* Turn on everything while shutting down */
>  	ufshcd_rpm_get_sync(hba);
>  	scsi_device_quiesce(sdev);
> @@ -9248,6 +9244,10 @@ static void ufshcd_wl_shutdown(struct device *dev)
>  		scsi_device_quiesce(sdev);
>  	}
>  	__ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
> +
> +	down(&hba->host_sem);
> +	hba->shutting_down = true;
> +	up(&hba->host_sem);
>  }
> 
>  /**
> --
> 2.26.0

Hi,

It seems that same patch below this.
https://lore.kernel.org/lkml/74cade30-6dde-c5f7-e009-b34423d22c12@xxxxxxxxx/

I think that will occurred error with called __ufshcd_wl_suspend().

So the hba->shutting_down need to set after call __ufshcd_wl_suspend().
Otherwise, the error_handler cannot operate when an error occurs.
Please give opinion.

Thanks.