[PATCH v4] iio: vadc: Fix potential dereference of NULL pointer

[Yongzhi Liu]

The return value of vadc_get_channel() needs to be checked to
avoid use of NULL pointer. vadc_do_conversion() already provides
error prints in at least some of it's error paths. Thus it is
reasonable to add the null pointer check on prop and drop the
extra reporting in vadc_measure_ref_points().

Signed-off-by: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
---
 drivers/iio/adc/qcom-spmi-vadc.c | 38 ++++++++++++++++++++++++++++----------
 1 file changed, 28 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index 34202ba..43a52b1 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -358,22 +358,33 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 	vadc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
 
 	prop = vadc_get_channel(vadc, VADC_REF_1250MV);
+	if (!prop) {
+		dev_err(vadc->dev, "Please define 1.25V channel\n");
+		ret = -ENODEV;
+		return ret;
+	}
 	ret = vadc_do_conversion(vadc, prop, &read_1);
 	if (ret)
-		goto err;
+		return ret;
 
 	/* Try with buffered 625mV channel first */
 	prop = vadc_get_channel(vadc, VADC_SPARE1);
-	if (!prop)
+	if (!prop) {
 		prop = vadc_get_channel(vadc, VADC_REF_625MV);
+		if (!prop) {
+			dev_err(vadc->dev, "Please define 0.625V channel\n");
+			ret = -ENODEV;
+			return ret;
+		}
+	}
 
 	ret = vadc_do_conversion(vadc, prop, &read_2);
 	if (ret)
-		goto err;
+		return ret;
 
 	if (read_1 == read_2) {
 		ret = -EINVAL;
-		goto err;
+		return ret;
 	}
 
 	vadc->graph[VADC_CALIB_ABSOLUTE].dy = read_1 - read_2;
@@ -381,25 +392,32 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 
 	/* Ratiometric calibration */
 	prop = vadc_get_channel(vadc, VADC_VDD_VADC);
+	if (!prop) {
+		dev_err(vadc->dev, "Please define VDD channel\n");
+		ret = -ENODEV;
+		return ret;
+	}
 	ret = vadc_do_conversion(vadc, prop, &read_1);
 	if (ret)
-		goto err;
+		return ret;
 
 	prop = vadc_get_channel(vadc, VADC_GND_REF);
+	if (!prop) {
+		dev_err(vadc->dev, "Please define GND channel\n");
+		ret = -ENODEV;
+		return ret;
+	}
 	ret = vadc_do_conversion(vadc, prop, &read_2);
 	if (ret)
-		goto err;
+		return ret;
 
 	if (read_1 == read_2) {
 		ret = -EINVAL;
-		goto err;
+		return ret;
 	}
 
 	vadc->graph[VADC_CALIB_RATIOMETRIC].dy = read_1 - read_2;
 	vadc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_2;
-err:
-	if (ret)
-		dev_err(vadc->dev, "measure reference points failed\n");
 
 	return ret;
 }
-- 
2.7.4