Re: [PATCH 05/10] rtw88: Do not access registers while atomic

[Larry Finger]

On 5/18/22 03:23, Sascha Hauer wrote:
> The driver uses ieee80211_iterate_active_interfaces_atomic()
> and ieee80211_iterate_stations_atomic() in several places and does
> register accesses in the iterators. This doesn't cope with upcoming
> USB support as registers can only be accessed non-atomically.
>
> Split these into a two stage process: First use the atomic iterator
> functions to collect all active interfaces or stations on a list, then
> iterate over the list non-atomically and call the iterator on each
> entry.
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Suggested-by: Pkshih <pkshih@xxxxxxxxxxx>
> ---
>   drivers/net/wireless/realtek/rtw88/phy.c  |  6 +-
>   drivers/net/wireless/realtek/rtw88/ps.c   |  2 +-
>   drivers/net/wireless/realtek/rtw88/util.c | 92 +++++++++++++++++++++++
>   drivers/net/wireless/realtek/rtw88/util.h | 12 ++-
>   4 files changed, 105 insertions(+), 7 deletions(-)

...

> diff --git a/drivers/net/wireless/realtek/rtw88/util.c b/drivers/net/wireless/realtek/rtw88/util.c
> index 2c515af214e76..db55dbd5c533e 100644
> --- a/drivers/net/wireless/realtek/rtw88/util.c
> +++ b/drivers/net/wireless/realtek/rtw88/util.c
> @@ -105,3 +105,95 @@ void rtw_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
>   		*mcs = rate - DESC_RATEMCS0;
>   	}
>   }
> +
> +struct rtw_stas_entry {
> +	struct list_head list;
> +	struct ieee80211_sta *sta;
> +};
> +
> +struct rtw_iter_stas_data {
> +	struct rtw_dev *rtwdev;
> +	struct list_head list;
> +};
> +
> +void rtw_collect_sta_iter(void *data, struct ieee80211_sta *sta)
> +{
> +	struct rtw_iter_stas_data *iter_stas = data;
> +	struct rtw_stas_entry *stas_entry;
> +
> +	stas_entry = kmalloc(sizeof(*stas_entry), GFP_ATOMIC);
> +	if (!stas_entry)
> +		return;
> +
> +	stas_entry->sta = sta;
> +	list_add_tail(&stas_entry->list, &iter_stas->list);
> +}
> +
> +void rtw_iterate_stas(struct rtw_dev *rtwdev,
> +		      void (*iterator)(void *data,
> +				       struct ieee80211_sta *sta),
> +				       void *data)
> +{
> +	struct rtw_iter_stas_data iter_data;
> +	struct rtw_stas_entry *sta_entry, *tmp;
> +
> +	iter_data.rtwdev = rtwdev;
> +	INIT_LIST_HEAD(&iter_data.list);
> +
> +	ieee80211_iterate_stations_atomic(rtwdev->hw, rtw_collect_sta_iter,
> +					  &iter_data);
> +
> +	list_for_each_entry_safe(sta_entry, tmp, &iter_data.list,
> +				 list) {
> +		list_del_init(&sta_entry->list);
> +		iterator(data, sta_entry->sta);
> +		kfree(sta_entry);
> +	}
> +}
> +
> +struct rtw_vifs_entry {
> +	struct list_head list;
> +	struct ieee80211_vif *vif;
> +	u8 mac[ETH_ALEN];
> +};
> +
> +struct rtw_iter_vifs_data {
> +	struct rtw_dev *rtwdev;
> +	struct list_head list;
> +};
> +
> +void rtw_collect_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
> +{
> +	struct rtw_iter_vifs_data *iter_stas = data;
> +	struct rtw_vifs_entry *vifs_entry;
> +
> +	vifs_entry = kmalloc(sizeof(*vifs_entry), GFP_ATOMIC);
> +	if (!vifs_entry)
> +		return;
> +
> +	vifs_entry->vif = vif;
> +	ether_addr_copy(vifs_entry->mac, mac);
> +	list_add_tail(&vifs_entry->list, &iter_stas->list);
> +}
> +
> +void rtw_iterate_vifs(struct rtw_dev *rtwdev,
> +		      void (*iterator)(void *data, u8 *mac,
> +				       struct ieee80211_vif *vif),
> +		      void *data)
> +{
> +	struct rtw_iter_vifs_data iter_data;
> +	struct rtw_vifs_entry *vif_entry, *tmp;
> +
> +	iter_data.rtwdev = rtwdev;
> +	INIT_LIST_HEAD(&iter_data.list);
> +
> +	ieee80211_iterate_active_interfaces_atomic(rtwdev->hw,
> +			IEEE80211_IFACE_ITER_NORMAL, rtw_collect_vif_iter, &iter_data);
> +
> +	list_for_each_entry_safe(vif_entry, tmp, &iter_data.list,
> +				 list) {
> +		list_del_init(&vif_entry->list);
> +		iterator(data, vif_entry->mac, vif_entry->vif);
> +		kfree(vif_entry);
> +	}
> +}

Sasha,

Sparse shows the following warnings:

  CHECK   /home/finger/iwireless-next/drivers/net/wireless/realtek/rtw88/util.c
/home/finger/wireless-next/drivers/net/wireless/realtek/rtw88/util.c:119:6: 
warning: symbol 'rtw_collect_sta_iter' was not declared. Should it be static?
/home/finger/wireless-next/drivers/net/wireless/realtek/rtw88/util.c:165:6: 
warning: symbol 'rtw_collect_vif_iter' was not declared. Should it be static?

Larry