Re: [PATCH] drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size

From: Deepak Rawat
Date: Fri May 20 2022 - 12:12:22 EST


On Fri, May 20, 2022 at 12:20 AM Saurabh Sengar
<ssengar@xxxxxxxxxxxxxxxxxxx> wrote:
>
> There were two different approaches getting used in this driver to
> allocate vram:
> 1. VRAM allocation from PCI region for Gen1
> 2. VRAM alloaction from MMIO region for Gen2
> First approach limilts the vram to PCI BAR size, which is 64 MB in most
> legacy systems. This limits the maximum resolution to be restricted to
> 64 MB size, and with recent conclusion on fbdev issue its concluded to have
> similar allocation strategy for both Gen1 and Gen2. This patch unifies
> the Gen1 and Gen2 vram allocation strategy.
>
> Signed-off-by: Saurabh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
> ---
> FBdev patch Ref :
> https://lore.kernel.org/lkml/20220428143746.sya775ro5zi3kgm3@liuwe-devbox-debian-v2/T/
>
> drivers/gpu/drm/hyperv/hyperv_drm_drv.c | 76 ++-----------------------
> 1 file changed, 4 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_drv.c b/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> index 4a8941fa0815..a32afd84f361 100644
> --- a/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> +++ b/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> @@ -69,57 +69,8 @@ static struct pci_driver hyperv_pci_driver = {
> .remove = hyperv_pci_remove,
> };
>
> -static int hyperv_setup_gen1(struct hyperv_drm_device *hv)
> -{
> - struct drm_device *dev = &hv->dev;
> - struct pci_dev *pdev;
> - int ret;
> -
> - pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
> - PCI_DEVICE_ID_HYPERV_VIDEO, NULL);
> - if (!pdev) {
> - drm_err(dev, "Unable to find PCI Hyper-V video\n");
> - return -ENODEV;
> - }
> -
> - ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &hyperv_driver);
> - if (ret) {
> - drm_err(dev, "Not able to remove boot fb\n");
> - return ret;
> - }
> -
> - if (pci_request_region(pdev, 0, DRIVER_NAME) != 0)
> - drm_warn(dev, "Cannot request framebuffer, boot fb still active?\n");
> -
> - if ((pdev->resource[0].flags & IORESOURCE_MEM) == 0) {
> - drm_err(dev, "Resource at bar 0 is not IORESOURCE_MEM\n");
> - ret = -ENODEV;
> - goto error;
> - }
> -
> - hv->fb_base = pci_resource_start(pdev, 0);
> - hv->fb_size = pci_resource_len(pdev, 0);
> - if (!hv->fb_base) {
> - drm_err(dev, "Resource not available\n");
> - ret = -ENODEV;
> - goto error;
> - }
> -
> - hv->fb_size = min(hv->fb_size,
> - (unsigned long)(hv->mmio_megabytes * 1024 * 1024));
> - hv->vram = devm_ioremap(&pdev->dev, hv->fb_base, hv->fb_size);
> - if (!hv->vram) {
> - drm_err(dev, "Failed to map vram\n");
> - ret = -ENOMEM;
> - }
> -
> -error:
> - pci_dev_put(pdev);
> - return ret;
> -}
> -
> -static int hyperv_setup_gen2(struct hyperv_drm_device *hv,
> - struct hv_device *hdev)
> +static int hyperv_setup_gen(struct hyperv_drm_device *hv,
> + struct hv_device *hdev)
> {

nit: This can be renamed to hyperv_setup_vram instead.

Reviewed-by: Deepak Rawat <drawat.floss@xxxxxxxxx>

> struct drm_device *dev = &hv->dev;
> int ret;
> @@ -181,10 +132,7 @@ static int hyperv_vmbus_probe(struct hv_device *hdev,
> goto err_hv_set_drv_data;
> }
>
> - if (efi_enabled(EFI_BOOT))
> - ret = hyperv_setup_gen2(hv, hdev);
> - else
> - ret = hyperv_setup_gen1(hv);
> + ret = hyperv_setup_gen(hv, hdev);
>
> if (ret)
> goto err_vmbus_close;
> @@ -225,29 +173,13 @@ static int hyperv_vmbus_remove(struct hv_device *hdev)
> {
> struct drm_device *dev = hv_get_drvdata(hdev);
> struct hyperv_drm_device *hv = to_hv(dev);
> - struct pci_dev *pdev;
>
> drm_dev_unplug(dev);
> drm_atomic_helper_shutdown(dev);
> vmbus_close(hdev->channel);
> hv_set_drvdata(hdev, NULL);
>
> - /*
> - * Free allocated MMIO memory only on Gen2 VMs.
> - * On Gen1 VMs, release the PCI device
> - */
> - if (efi_enabled(EFI_BOOT)) {
> - vmbus_free_mmio(hv->mem->start, hv->fb_size);
> - } else {
> - pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
> - PCI_DEVICE_ID_HYPERV_VIDEO, NULL);
> - if (!pdev) {
> - drm_err(dev, "Unable to find PCI Hyper-V video\n");
> - return -ENODEV;
> - }
> - pci_release_region(pdev, 0);
> - pci_dev_put(pdev);
> - }
> + vmbus_free_mmio(hv->mem->start, hv->fb_size);
>
> return 0;
> }
> --
> 2.25.1
>