Re: [PATCH 1/6] dt-bindings: regulator: qcom,spmi-regulator: Convert to dtschema

[Robert Marko]

On Tue, 17 May 2022 at 09:26, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 15/05/2022 22:31, Robert Marko wrote:
> > Convert the bindings of Qualcomm SPMI regulators to DT schema.
> >
> > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > ---
> > I am aware that syscon alone is not really acceptable, its converted
> > directly from the old text bindings.
> >
> > There is also the issue of some MSM8994, MSM8996 and APQ8096 devices using
> > '#address-cells', '#size-cells', some even defining reg property for
> > regulators.
> >
> > Any advice on how to solve these issues is appreciated.
> > ---
> >  .../regulator/qcom,spmi-regulator.yaml        | 176 ++++++++++++++++++
>
> You miss here the actual conversion... where is the removal of old file?

Hi,

Oh yeah, sorry for forgetting this.
Will fixup in v2.

>
> >  1 file changed, 176 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
> > new file mode 100644
> > index 000000000000..f7da310f1845
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
> > @@ -0,0 +1,176 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SPMI Regulators
> > +
> > +maintainers:
> > +  - Robert Marko <robert.marko@xxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,pm660-regulators
> > +      - qcom,pm660l-regulators
> > +      - qcom,pm8004-regulators
> > +      - qcom,pm8005-regulators
> > +      - qcom,pm8226-regulators
> > +      - qcom,pm8841-regulators
> > +      - qcom,pm8916-regulators
> > +      - qcom,pm8941-regulators
> > +      - qcom,pm8950-regulators
> > +      - qcom,pm8994-regulators
> > +      - qcom,pmi8994-regulators
> > +      - qcom,pms405-regulators
> > +
> > +  qcom,saw-reg:
> > +    description: Reference to syscon node defining the SAW registers
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - qcom,pm8941-regulators
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          items:
> > +            - description: Over-current protection interrupt for 5V S1
> > +            - description: Over-current protection interrupt for 5V S2
> > +        interrupt-names:
> > +          items:
> > +            - const: ocp-5vs1
> > +            - const: ocp-5vs2
> > +
> > +patternProperties:
>
> This goes just after "properties:"

Will fixup in v2.

Regards,
Robert
>
> > +  ".*-supply$":
> > +    description: Input supply phandle(s) for this node
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +
>
> Best regards,
> Krzysztof