[PATCH] PCI: Clear PCI_STATUS when setting up the device

From: Kai-Heng Feng
Date: Tue May 17 2022 - 00:38:40 EST


We are seeing Master Abort bit is set on Intel I350 ethernet device and its
root port right after boot, probably happened during BIOS phase:

00:06.0 PCI bridge [0604]: Intel Corporation Device [8086:464d] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

6e:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Subsystem: Intel Corporation Ethernet Server Adapter I350-T2 [8086:00a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

6e:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
Subsystem: Intel Corporation Ethernet Server Adapter I350-T2 [8086:00a2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

And the Master Abort bit is cleared after S3.

Since there's no functional impact found, clear the PCI_STATUS to treat
it anew at setting up.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215989
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
drivers/pci/probe.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 17a969942d370..414f659dc8735 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1890,6 +1890,9 @@ int pci_setup_device(struct pci_dev *dev)

dev->broken_intx_masking = pci_intx_mask_broken(dev);

+ /* Clear errors left from system firmware */
+ pci_write_config_word(dev, PCI_STATUS, 0xffff);
+
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
if (class == PCI_CLASS_BRIDGE_PCI)
--
2.34.1