Re: [PATCH V3 5/5] iio: accel: sca3300: Add inclination channels

From: Jonathan Cameron
Date: Sat May 07 2022 - 10:38:30 EST

Next message: Chen Yu: "Re: [PATCH v3] sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg"
Previous message: Gonsolo: "Re: Suspend/resume error with AWUS036ACM"
In reply to: kernel test robot: "Re: [PATCH V3 5/5] iio: accel: sca3300: Add inclination channels"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 4 May 2022 13:36:12 +0000
LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx> wrote:

> Different from SCA3300, SCL3300 can output inclination angles.
> Angles are formed from acceleration with following equations:
> ANG_X = atan2(accx / √(accy^2 + accz^2)),
> ANG_Y = atan2(accy / √(accx^2 + accz^2)),
> ANG_Z = atan2(accz / √(accx^2 + accy^2)),
>
> The commit adds the output of the raw value, scale
> and scale_available of angles.
>
> New interfaces:
> in_incli_scale
> in_incli_scale_available
> in_incli_x_raw
> in_incli_y_raw
> in_incli_z_raw
> Data converted by application of scale to degrees.
>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx>

Don't add tags for other people. They have to be explicitly given by the person
in question.

This isn't reflecting that people reviewed the code, but that they
reviewed the code and are happy with it. That's not yet the case
and even if they are happy, it is up to individual reviewers to give
a tag or not as they wish.

Easy to tell in my case as I don't use that email address for tags ;)

Jonathan

> Signed-off-by: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/iio/accel/sca3300.c | 79 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 77 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/accel/sca3300.c b/drivers/iio/accel/sca3300.c
> index 040f8e1a1327..cf588f014407 100644
> --- a/drivers/iio/accel/sca3300.c
> +++ b/drivers/iio/accel/sca3300.c
> @@ -42,12 +42,18 @@
> #define SCA3300_VALUE_RS_ERROR 0x3
> #define SCA3300_MASK_RS_STATUS GENMASK(1, 0)
>
> +#define SCA3300_REG_ANG_CTRL 0x0C
> +#define SCA3300_ANG_ENABLE 0x1F
> +
> enum sca3300_scan_indexes {
> SCA3300_ACC_X = 0,
> SCA3300_ACC_Y,
> SCA3300_ACC_Z,
> SCA3300_TEMP,
> SCA3300_TIMESTAMP,
> + SCA3300_INCLI_X,
> + SCA3300_INCLI_Y,
> + SCA3300_INCLI_Z,
> };
>
> #define SCA3300_ACCEL_CHANNEL(index, reg, axis) { \
> @@ -71,6 +77,24 @@ enum sca3300_scan_indexes {
> }, \
> }
>
> +#define SCA3300_INCLI_CHANNEL(index, reg, axis) { \
> + .type = IIO_INCLI, \
> + .address = reg, \
> + .modified = 1, \
> + .channel2 = IIO_MOD_##axis, \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type_available = \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .scan_index = index, \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = 16, \
> + .storagebits = 16, \
> + .endianness = IIO_CPU, \
> + }, \
> +}
> +
> #define SCA3300_TEMP_CHANNEL(index, reg) { \
> .type = IIO_TEMP, \
> .address = reg, \
> @@ -102,28 +126,54 @@ static const int scl3300_accel_scale_tbl[][2] = {{0, 167}, {0, 333}, {0, 83}};
> static const int sca3300_accel_scale_modes_map[] = {0, 1, 2, 2};
> static const int scl3300_accel_scale_modes_map[] = {0, 1, 2};
>
> +static const int scl3300_incli_scale_tbl[][2] = {{0, 5495}};
> +static const int scl3300_incli_scale_modes_map[] = {0, 0, 0};
> +
> static const int sca3300_avail_modes_map[] = {0, 1, 2, 3};
> static const int scl3300_avail_modes_map[] = {0, 1, 3};
> +
> +static const struct iio_chan_spec scl3300_channels[] = {
> + SCA3300_ACCEL_CHANNEL(SCA3300_ACC_X, 0x1, X),
> + SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Y, 0x2, Y),
> + SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Z, 0x3, Z),
> + SCA3300_TEMP_CHANNEL(SCA3300_TEMP, 0x05),
> + IIO_CHAN_SOFT_TIMESTAMP(SCA3300_TIMESTAMP),
> + SCA3300_INCLI_CHANNEL(SCA3300_INCLI_X, 0x09, X),
> + SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Y, 0x0A, Y),
> + SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Z, 0x0B, Z),
> +};
> +
> static const unsigned long sca3300_scan_masks[] = {
> BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z) |
> BIT(SCA3300_TEMP),
> 0
> };
>
> +static const unsigned long scl3300_scan_masks[] = {
> + BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z) |
> + BIT(SCA3300_TEMP) |
> + BIT(SCA3300_INCLI_X) | BIT(SCA3300_INCLI_Y) | BIT(SCA3300_INCLI_Z),
> + 0
> +};
> +
> struct sca3300_chip_info {
> const struct iio_chan_spec *channels;
> const int (*accel_scale_table)[2];
> + const int (*incli_scale_table)[2];
> const int *accel_scale_modes_map;
> + const int *incli_scale_modes_map;
> const unsigned long *scan_masks;
> const int *avail_modes_table;
> const int *freq_modes_map;
> const int *freq_table;
> const u8 num_accel_scales;
> + const u8 num_incli_scales;
> const u8 num_avail_modes;
> const u8 num_channels;
> const u8 num_freqs;
> const u8 chip_id;
> const char *name;
> + const bool angle;
> };
>
> /**
> @@ -156,24 +206,32 @@ static const struct sca3300_chip_info sca3300_chip_tbl[] = {
> .freq_table = sca3300_freq_tbl,
> .scan_masks = sca3300_scan_masks,
> .channels = sca3300_channels,
> + .incli_scale_modes_map = NULL,
> + .incli_scale_table = NULL,
> + .num_incli_scales = 0,
> .num_avail_modes = 4,
> .name = "sca3300",
> .chip_id = 0x51,
> .num_freqs = 2,
> + .angle = false,
> },
> { .num_accel_scales = ARRAY_SIZE(scl3300_accel_scale_tbl)*2,
> + .num_incli_scales = ARRAY_SIZE(scl3300_incli_scale_tbl)*2,
> .accel_scale_modes_map = scl3300_accel_scale_modes_map,
> + .incli_scale_modes_map = scl3300_incli_scale_modes_map,
> .accel_scale_table = scl3300_accel_scale_tbl,
> - .num_channels = ARRAY_SIZE(sca3300_channels),
> + .incli_scale_table = scl3300_incli_scale_tbl,
> + .num_channels = ARRAY_SIZE(scl3300_channels),
> .avail_modes_table = scl3300_avail_modes_map,
> .freq_modes_map = scl3300_freq_modes_map,
> .scan_masks = sca3300_scan_masks,
> .freq_table = scl3300_freq_tbl,
> - .channels = sca3300_channels,
> + .channels = scl3300_channels,
> .num_avail_modes = 3,
> .name = "scl3300",
> .chip_id = 0xC1,
> .num_freqs = 3,
> + .angle = true,
> },
> };
>
> @@ -382,6 +440,11 @@ static int sca3300_read_raw(struct iio_dev *indio_dev,
> if (ret)
> return ret;
> switch (chan->type) {
> + case IIO_INCLI:
> + index = data->chip->incli_scale_modes_map[reg_val];
> + *val = data->chip->incli_scale_table[index][0];
> + *val2 = data->chip->incli_scale_table[index][1];
> + return IIO_VAL_INT_PLUS_MICRO;
> case IIO_ACCEL:
> index = data->chip->accel_scale_modes_map[reg_val];
> *val = data->chip->accel_scale_table[index][0];
> @@ -473,6 +536,13 @@ static int sca3300_init(struct sca3300_data *sca_data,
> indio_dev->name = sca3300_chip_tbl[i].name;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> + if (sca_data->chip->angle) {
> + ret = sca3300_write_reg(sca_data, SCA3300_REG_ANG_CTRL,
> + SCA3300_ANG_ENABLE);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
>
> @@ -508,6 +578,11 @@ static int sca3300_read_avail(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_SCALE:
> switch (chan->type) {
> + case IIO_INCLI:
> + *vals = (const int *)data->chip->incli_scale_table;
> + *length = data->chip->num_incli_scales;
> + *type = IIO_VAL_INT_PLUS_MICRO;
> + return IIO_AVAIL_LIST;
> case IIO_ACCEL:
> *vals = (const int *)data->chip->accel_scale_table;
> *length = data->chip->num_accel_scales;

Next message: Chen Yu: "Re: [PATCH v3] sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg"
Previous message: Gonsolo: "Re: Suspend/resume error with AWUS036ACM"
In reply to: kernel test robot: "Re: [PATCH V3 5/5] iio: accel: sca3300: Add inclination channels"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]