[PATCH 2/2] ASoc: fsl_micfil: explicitly clear CHnF flags

[Shengjiu Wang]

There may be failure when start 1 channel recording after
8 channels recording. The reason is that the CHnF
flags are not cleared successfully by software reset.

This issue is triggerred by the change of clearing
software reset bit.

CHnF flags are write 1 clear bits. Clear them by force
write.

Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
---
 sound/soc/fsl/fsl_micfil.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 2149fac0dcc6..e4d1da55293e 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -190,6 +190,14 @@ static int fsl_micfil_reset(struct device *dev)
 	if (ret)
 		return ret;
 
+	/*
+	 * Set SRES should clear CHnF flags, But even add delay here
+	 * the CHnF may not be cleared sometimes, so clear CHnF explicitly.
+	 */
+	ret = regmap_write_bits(micfil->regmap, REG_MICFIL_STAT, 0xFF, 0xFF);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
-- 
2.17.1