Re: [PATCH printk v5 1/1] printk: extend console_lock for per-console locking

[Marek Szyprowski]

Hi John,

On 06.05.2022 00:33, John Ogness wrote:
> On 2022-05-05, John Ogness <john.ogness@xxxxxxxxxxxxx> wrote:
>> I will go through and check if all access to AML_UART_CONTROL is
>> protected by port->lock.
> The startup() callback of the uart_ops is not called with the port
> locked. I'm having difficulties identifying if the startup() callback
> can occur after the console was already registered via meson_uart_init()
> and could be actively printing, but I see other serial drivers are
> protecting their registers in the startup() callback with the
> port->lock.
>
> Could you try booting the meson hardware with the following change? (And
> removing any previous debug changes I posted?)

Bingo! It looks that the startup() is called when getty initializes 
console. This fixed the issues observed on the Amlogic Meson based boards.

Feel free to add:

Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland