[PATCH 6/6] arm64: dts: qcom: sdm630: correct QFPROM byte offsets

[Krzysztof Kozlowski]

The NVMEM bindings expect that 'bits' property holds offset and size of
region within a byte, so it applies a constraint of <0, 7> for the
offset.  Using 25 as HSTX trim offset is within 4-byte QFPROM word, but
outside of the byte:

  sdm630-sony-xperia-nile-discovery.dtb: qfprom@780000: hstx-trim@240:bits:0:0: 25 is greater than the maximum of 7
  sdm630-sony-xperia-nile-discovery.dtb: qfprom@780000: gpu-speed-bin@41a0:bits:0:0: 21 is greater than the maximum of 7

Align the offsets to match the bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Not tested on SDM630 hardware, but similar behavior on SDM845 works
fine (although causes a read of 4 bytes instead of 1).
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 505e10674cb6..c713aa6e7044 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -558,13 +558,13 @@ qfprom: qfprom@780000 {
 			#size-cells = <1>;
 
 			qusb2_hstx_trim: hstx-trim@240 {
-				reg = <0x240 0x1>;
-				bits = <25 3>;
+				reg = <0x243 0x1>;
+				bits = <1 3>;
 			};
 
 			gpu_speed_bin: gpu-speed-bin@41a0 {
-				reg = <0x41a0 0x1>;
-				bits = <21 7>;
+				reg = <0x41a2 0x1>;
+				bits = <5 7>;
 			};
 		};
 
-- 
2.32.0