[PATCH 5.10 022/129] usb: dwc3: Try usb-role-switch first in dwc3_drd_init

From: Greg Kroah-Hartman
Date: Wed May 04 2022 - 12:59:47 EST


From: Sven Peter <sven@xxxxxxxxxxxxx>

commit ab7aa2866d295438dc60522f85c5421c6b4f1507 upstream.

If the PHY controller node has a "port" dwc3 tries to find an
extcon device even when "usb-role-switch" is present. This happens
because dwc3_get_extcon() sees that "port" node and then calls
extcon_find_edev_by_node() which will always return EPROBE_DEFER
in that case.

On the other hand, even if an extcon was present and dwc3_get_extcon()
was successful it would still be ignored in favor of "usb-role-switch".

Let's just first check if "usb-role-switch" is configured in the device
tree and directly use it instead and only try to look for an extcon
device otherwise.

Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.")
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Sven Peter <sven@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@xxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/drd.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -568,16 +568,15 @@ int dwc3_drd_init(struct dwc3 *dwc)
{
int ret, irq;

+ if (ROLE_SWITCH &&
+ device_property_read_bool(dwc->dev, "usb-role-switch"))
+ return dwc3_setup_role_switch(dwc);
+
dwc->edev = dwc3_get_extcon(dwc);
if (IS_ERR(dwc->edev))
return PTR_ERR(dwc->edev);

- if (ROLE_SWITCH &&
- device_property_read_bool(dwc->dev, "usb-role-switch")) {
- ret = dwc3_setup_role_switch(dwc);
- if (ret < 0)
- return ret;
- } else if (dwc->edev) {
+ if (dwc->edev) {
dwc->edev_nb.notifier_call = dwc3_drd_notifier;
ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
&dwc->edev_nb);