[tip: perf/core] perf/x86/amd/core: Add PerfMonV2 overflow handling

From: tip-bot2 for Sandipan Das
Date: Wed May 04 2022 - 05:23:43 EST


The following commit has been merged into the perf/core branch of tip:

Commit-ID: 7685665c390dc68c2d9a74e8445f41494cc8f6cf
Gitweb: https://git.kernel.org/tip/7685665c390dc68c2d9a74e8445f41494cc8f6cf
Author: Sandipan Das <sandipan.das@xxxxxxx>
AuthorDate: Thu, 21 Apr 2022 11:16:58 +05:30
Committer: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
CommitterDate: Wed, 04 May 2022 11:18:27 +02:00

perf/x86/amd/core: Add PerfMonV2 overflow handling

If AMD Performance Monitoring Version 2 (PerfMonV2) is
supported, use a new scheme to process Core PMC overflows
in the NMI handler using the new global control and status
registers. This will be bypassed on unsupported hardware
(x86_pmu.version < 2).

In x86_pmu_handle_irq(), overflows are detected by testing
the contents of the PERF_CTR register for each active PMC in
a loop. The new scheme instead inspects the overflow bits of
the global status register.

The Performance Counter Global Status (PerfCntrGlobalStatus)
register has overflow (PerfCntrOvfl) bits for each PMC. This
is, however, a read-only MSR. To acknowledge that overflows
have been processed, the NMI handler must clear the bits by
writing to the PerfCntrGlobalStatusClr register.

In x86_pmu_handle_irq(), PMCs counting the same event that
are started and stopped at the same time record slightly
different counts due to delays in between reads from the
PERF_CTR registers. This is fixed by stopping and starting
the PMCs at the same before and with a single write to the
Performance Counter Global Control (PerfCntrGlobalCtl) upon
entering and before exiting the NMI handler.

Signed-off-by: Sandipan Das <sandipan.das@xxxxxxx>
Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/f20b7e4da0b0a83bdbe05857f354146623bc63ab.1650515382.git.sandipan.das@xxxxxxx
---
arch/x86/events/amd/core.c | 144 +++++++++++++++++++++++++++++++++---
1 file changed, 133 insertions(+), 11 deletions(-)

diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index a339c3e..262e39a 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -8,6 +8,7 @@
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <asm/apicdef.h>
+#include <asm/apic.h>
#include <asm/nmi.h>

#include "../perf_event.h"
@@ -669,6 +670,45 @@ static inline void amd_pmu_set_global_ctl(u64 ctl)
wrmsrl(MSR_AMD64_PERF_CNTR_GLOBAL_CTL, ctl);
}

+static inline u64 amd_pmu_get_global_status(void)
+{
+ u64 status;
+
+ /* PerfCntrGlobalStatus is read-only */
+ rdmsrl(MSR_AMD64_PERF_CNTR_GLOBAL_STATUS, status);
+
+ return status & amd_pmu_global_cntr_mask;
+}
+
+static inline void amd_pmu_ack_global_status(u64 status)
+{
+ /*
+ * PerfCntrGlobalStatus is read-only but an overflow acknowledgment
+ * mechanism exists; writing 1 to a bit in PerfCntrGlobalStatusClr
+ * clears the same bit in PerfCntrGlobalStatus
+ */
+
+ /* Only allow modifications to PerfCntrGlobalStatus.PerfCntrOvfl */
+ status &= amd_pmu_global_cntr_mask;
+ wrmsrl(MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_CLR, status);
+}
+
+static bool amd_pmu_test_overflow_topbit(int idx)
+{
+ u64 counter;
+
+ rdmsrl(x86_pmu_event_addr(idx), counter);
+
+ return !(counter & BIT_ULL(x86_pmu.cntval_bits - 1));
+}
+
+static bool amd_pmu_test_overflow_status(int idx)
+{
+ return amd_pmu_get_global_status() & BIT_ULL(idx);
+}
+
+DEFINE_STATIC_CALL(amd_pmu_test_overflow, amd_pmu_test_overflow_topbit);
+
/*
* When a PMC counter overflows, an NMI is used to process the event and
* reset the counter. NMI latency can result in the counter being updated
@@ -681,7 +721,6 @@ static inline void amd_pmu_set_global_ctl(u64 ctl)
static void amd_pmu_wait_on_overflow(int idx)
{
unsigned int i;
- u64 counter;

/*
* Wait for the counter to be reset if it has overflowed. This loop
@@ -689,8 +728,7 @@ static void amd_pmu_wait_on_overflow(int idx)
* forever...
*/
for (i = 0; i < OVERFLOW_WAIT_COUNT; i++) {
- rdmsrl(x86_pmu_event_addr(idx), counter);
- if (counter & (1ULL << (x86_pmu.cntval_bits - 1)))
+ if (!static_call(amd_pmu_test_overflow)(idx))
break;

/* Might be in IRQ context, so can't sleep */
@@ -830,6 +868,24 @@ static void amd_pmu_del_event(struct perf_event *event)
* handled a counter. When an un-handled NMI is received, it will be claimed
* only if arriving within that window.
*/
+static inline int amd_pmu_adjust_nmi_window(int handled)
+{
+ /*
+ * If a counter was handled, record a timestamp such that un-handled
+ * NMIs will be claimed if arriving within that window.
+ */
+ if (handled) {
+ this_cpu_write(perf_nmi_tstamp, jiffies + perf_nmi_window);
+
+ return handled;
+ }
+
+ if (time_after(jiffies, this_cpu_read(perf_nmi_tstamp)))
+ return NMI_DONE;
+
+ return NMI_HANDLED;
+}
+
static int amd_pmu_handle_irq(struct pt_regs *regs)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -857,20 +913,84 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
if (pmu_enabled)
amd_pmu_enable_all(0);

+ return amd_pmu_adjust_nmi_window(handled);
+}
+
+static int amd_pmu_v2_handle_irq(struct pt_regs *regs)
+{
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+ struct perf_sample_data data;
+ struct hw_perf_event *hwc;
+ struct perf_event *event;
+ int handled = 0, idx;
+ u64 status, mask;
+ bool pmu_enabled;
+
/*
- * If a counter was handled, record a timestamp such that un-handled
- * NMIs will be claimed if arriving within that window.
+ * Save the PMU state as it needs to be restored when leaving the
+ * handler
*/
- if (handled) {
- this_cpu_write(perf_nmi_tstamp, jiffies + perf_nmi_window);
+ pmu_enabled = cpuc->enabled;
+ cpuc->enabled = 0;

- return handled;
+ /* Stop counting */
+ amd_pmu_v2_disable_all();
+
+ status = amd_pmu_get_global_status();
+
+ /* Check if any overflows are pending */
+ if (!status)
+ goto done;
+
+ for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ event = cpuc->events[idx];
+ hwc = &event->hw;
+ x86_perf_event_update(event);
+ mask = BIT_ULL(idx);
+
+ if (!(status & mask))
+ continue;
+
+ /* Event overflow */
+ handled++;
+ perf_sample_data_init(&data, 0, hwc->last_period);
+
+ if (!x86_perf_event_set_period(event))
+ continue;
+
+ if (perf_event_overflow(event, &data, regs))
+ x86_pmu_stop(event, 0);
+
+ status &= ~mask;
}

- if (time_after(jiffies, this_cpu_read(perf_nmi_tstamp)))
- return NMI_DONE;
+ /*
+ * It should never be the case that some overflows are not handled as
+ * the corresponding PMCs are expected to be inactive according to the
+ * active_mask
+ */
+ WARN_ON(status > 0);

- return NMI_HANDLED;
+ /* Clear overflow bits */
+ amd_pmu_ack_global_status(~status);
+
+ /*
+ * Unmasking the LVTPC is not required as the Mask (M) bit of the LVT
+ * PMI entry is not set by the local APIC when a PMC overflow occurs
+ */
+ inc_irq_stat(apic_perf_irqs);
+
+done:
+ cpuc->enabled = pmu_enabled;
+
+ /* Resume counting only if PMU is active */
+ if (pmu_enabled)
+ amd_pmu_v2_enable_all(0);
+
+ return amd_pmu_adjust_nmi_window(handled);
}

static struct event_constraint *
@@ -1256,6 +1376,8 @@ static int __init amd_core_pmu_init(void)
x86_pmu.enable_all = amd_pmu_v2_enable_all;
x86_pmu.disable_all = amd_pmu_v2_disable_all;
x86_pmu.enable = amd_pmu_v2_enable_event;
+ x86_pmu.handle_irq = amd_pmu_v2_handle_irq;
+ static_call_update(amd_pmu_test_overflow, amd_pmu_test_overflow_status);
}

/*