Re: [PATCH 1/1] termbits: Convert octal defines to hex

From: Ilpo Järvinen
Date: Wed May 04 2022 - 04:33:50 EST


On Wed, 4 May 2022, Arnd Bergmann wrote:

> On Wed, May 4, 2022 at 9:20 AM Ilpo Järvinen
> <ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
> >
> > Many archs have termbits.h as octal numbers. It makes hard for humans
> > to parse the magnitude of large numbers correctly and to compare with
> > hex ones of the same define.
> >
> > Convert octal values to hex.
> >
> > First step is an automated conversion with:
> >
> > for i in $(git ls-files | grep 'termbits\.h'); do
> > awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
> > l=int(((length($3) - 1) * 3 + 3) / 4);
> > repl = sprintf("0x%0" l "x", $3);
> > print gensub(/[^[:blank:]]+/, repl, 3);
> > next} {print}' $i > $i~;
> > mv $i~ $i;
> > done
> >
> > On top of that, some manual processing on alignment and number of zeros.
> > In addition, small tweaks to formatting of a few comments on the same
> > lines.
> >
> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
>
> Good idea!
>
> I assume you already checked if additional file contents can be shared across
> architectures? I think I've tried in the past but didn't really get
> anywhere with
> that.
>
> After applying the patch locally, I still see a bunch of whitespace
> differences in the
> changed lines if I run
>
> vimdiff arch/*/include/uapi/asm/termbits.h include/uapi/asm-generic/termbits.h
>
> I think this mostly because you left the sparc version alone (it already
> uses hex constants), but it may be nice to edit this a little more to
> make the actual differences stick out more.

I took a look on further harmonizing, however, it turned out to be not
that simple. This is basically the pipeline I use to further cleanup the
differences and remove comments if you want to play yourself, just remove
stages from the tail to get the intermediate datas (gawk is required for
--non-decimal-data):

$ git ls-files | grep 'termbits\.h' | xargs grep -h -e '#define' | awk --non-decimal-data '{if (NF < 3) {next}; printf("#define %s\t0x%08x\n", $2, $3)}' | sort | uniq -c | sort | awk '{print $1}' | uniq -c
82 1
74 2
14 3
58 4
11 5
54 6

So only 54 are the same for all archs (non-numeric defines such as EXT[AB]
will appear as 0x0 but at least those two seem the same across archs
anyway):
6 #define B0 0x00000000
6 #define B110 0x00000003
6 #define B1200 0x00000009
6 #define B134 0x00000004
6 #define B150 0x00000005
6 #define B1800 0x0000000a
6 #define B19200 0x0000000e
6 #define B200 0x00000006
6 #define B2400 0x0000000b
6 #define B300 0x00000007
6 #define B38400 0x0000000f
6 #define B4800 0x0000000c
6 #define B50 0x00000001
6 #define B600 0x00000008
6 #define B75 0x00000002
6 #define B9600 0x0000000d
6 #define BRKINT 0x00000002
6 #define BS0 0x00000000
6 #define CMSPAR 0x40000000
6 #define CR0 0x00000000
6 #define CRTSCTS 0x80000000
6 #define CS5 0x00000000
6 #define ECHO 0x00000008
6 #define EXTA 0x00000000
6 #define EXTB 0x00000000
6 #define FF0 0x00000000
6 #define IBSHIFT 0x00000010
6 #define ICRNL 0x00000100
6 #define IGNBRK 0x00000001
6 #define IGNCR 0x00000080
6 #define IGNPAR 0x00000004
6 #define INLCR 0x00000040
6 #define INPCK 0x00000010
6 #define ISTRIP 0x00000020
6 #define IXANY 0x00000800
6 #define NL0 0x00000000
6 #define NL1 0x00000100
6 #define OCRNL 0x00000008
6 #define OFDEL 0x00000080
6 #define OFILL 0x00000040
6 #define ONLRET 0x00000020
6 #define ONOCR 0x00000010
6 #define OPOST 0x00000001
6 #define PARMRK 0x00000008
6 #define TAB0 0x00000000
6 #define TCIFLUSH 0x00000000
6 #define TCIOFF 0x00000002
6 #define TCIOFLUSH 0x00000002
6 #define TCION 0x00000003
6 #define TCOFLUSH 0x00000001
6 #define TCOOFF 0x00000000
6 #define TCOON 0x00000001
6 #define TCSANOW 0x00000000
6 #define VT0 0x00000000

Sadly for the others, it just tends to be that one or two are different
from the rest.



--
i.