Re: [PATCH v2] bus: mhi: host: Add support for Foxconn T99W373 and T99W368

[Manivannan Sadhasivam]

On Tue, May 03, 2022 at 10:43:49AM +0800, Slark Xiao wrote:
> Product's enumeration align with previous Foxconn
> SDX55, so T99W373(SDX62)/T99W368(SDX65) would use
>  the same config as Foxconn SDX55.
> Remove fw and edl for this new commit.
> 
> Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>

Applied to mhi-next!

Thanks,
Mani

> ---
>  drivers/bus/mhi/host/pci_generic.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 24c94c23d78b..6fbc5915ea36 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -371,6 +371,15 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
>  	.sideband_wake = false,
>  };
>  
> +static const struct mhi_pci_dev_info mhi_foxconn_sdx65_info = {
> +	.name = "foxconn-sdx65",
> +	.config = &modem_foxconn_sdx55_config,
> +	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> +	.dma_data_width = 32,
> +	.mru_default = 32768,
> +	.sideband_wake = false,
> +};
> +
>  static const struct mhi_channel_config mhi_mv3x_channels[] = {
>  	MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0),
>  	MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0),
> @@ -560,6 +569,12 @@ static const struct pci_device_id mhi_pci_id_table[] = {
>  	/* T99W175 (sdx55), Based on Qualcomm new baseline */
>  	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0bf),
>  		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
> +	/* T99W368 (sdx65) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d8),
> +		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
> +	/* T99W373 (sdx62) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
> +		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
>  	/* MV31-W (Cinterion) */
>  	{ PCI_DEVICE(0x1269, 0x00b3),
>  		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
> -- 
> 2.25.1
>