[PATCH] arm64: dts: mt8192: Follow binding order for SCP registers

[Nícolas F. R. A. Prado]

The dt-binding for SCP documents the reg-names order as sram, cfg,
l1tcm. Update the SCP node on the mt8192 devicetree to follow that
order, which gets rid of a dtbs_check warning. This doesn't change any
behavior since the SCP driver accesses the memory regions through the
names anyway.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>

---

 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 26dbe9ecc528..733aec2e7f77 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -699,9 +699,9 @@ spi7: spi@1101e000 {
 		scp: scp@10500000 {
 			compatible = "mediatek,mt8192-scp";
 			reg = <0 0x10500000 0 0x100000>,
-			      <0 0x10700000 0 0x8000>,
-			      <0 0x10720000 0 0xe0000>;
-			reg-names = "sram", "l1tcm", "cfg";
+			      <0 0x10720000 0 0xe0000>,
+			      <0 0x10700000 0 0x8000>;
+			reg-names = "sram", "cfg", "l1tcm";
 			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg CLK_INFRA_SCPSYS>;
 			clock-names = "main";
-- 
2.36.0