[PATCH v6 07/11] spi: aspeed: Add support for the AST2400 SPI controller

From: Cédric Le Goater
Date: Tue May 03 2022 - 02:08:00 EST


Extend the driver for the AST2400 SPI Flash Controller (SPI). This
controller has a slightly different interface which requires
adaptation of the 4B handling. Summary of features :

. host Firmware
. 1 chip select pin (CE0)
. slightly different register set, between AST2500 and the legacy
controller
. no segment registers
. single, dual mode.

Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
Tested-by: Joel Stanley <joel@xxxxxxxxx>
Tested-by: Tao Ren <rentao.bupt@xxxxxxxxx>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@xxxxxxxxxxx>
Signed-off-by: Cédric Le Goater <clg@xxxxxxxx>
---
drivers/spi/spi-aspeed-smc.c | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
index d2b3342c133e..d2b63c8bb88f 100644
--- a/drivers/spi/spi-aspeed-smc.c
+++ b/drivers/spi/spi-aspeed-smc.c
@@ -30,6 +30,7 @@
#define CTRL_IO_DUAL_DATA BIT(29)
#define CTRL_IO_QUAD_DATA BIT(30)
#define CTRL_COMMAND_SHIFT 16
+#define CTRL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI only */
#define CTRL_IO_DUMMY_SET(dummy) \
(((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6))
#define CTRL_CE_STOP_ACTIVE BIT(2)
@@ -280,6 +281,8 @@ static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op
return spi_mem_default_supports_op(mem, op);
}

+static const struct aspeed_spi_data ast2400_spi_data;
+
static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
{
struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master);
@@ -309,6 +312,9 @@ static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *o
addr_mode |= (0x11 << chip->cs);
else
addr_mode &= ~(0x11 << chip->cs);
+
+ if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data)
+ ctl_val |= CTRL_IO_ADDRESS_4B;
}

if (op->dummy.nbytes)
@@ -398,7 +404,13 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip)
struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 };
struct aspeed_spi_window *win = &windows[chip->cs];

- aspeed_spi_get_windows(aspi, windows);
+ /* No segment registers for the AST2400 SPI controller */
+ if (aspi->data == &ast2400_spi_data) {
+ win->offset = 0;
+ win->size = aspi->ahb_window_size;
+ } else {
+ aspeed_spi_get_windows(aspi, windows);
+ }

chip->ahb_base = aspi->ahb_base + win->offset;
chip->ahb_window_size = win->size;
@@ -461,6 +473,10 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
struct aspeed_spi_window *win = &windows[chip->cs];
int ret;

+ /* No segment registers for the AST2400 SPI controller */
+ if (aspi->data == &ast2400_spi_data)
+ return 0;
+
/*
* Due to an HW issue on the AST2500 SPI controller, the CE0
* window size should be smaller than the maximum 128MB.
@@ -545,6 +561,12 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
else
addr_mode &= ~(0x11 << chip->cs);
writel(addr_mode, aspi->regs + CE_CTRL_REG);
+
+ /* AST2400 SPI controller sets 4BYTE address mode in
+ * CE0 Control Register
+ */
+ if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data)
+ ctl_val |= CTRL_IO_ADDRESS_4B;
}

/* READ mode is the controller default setting */
@@ -816,6 +838,14 @@ static const struct aspeed_spi_data ast2400_fmc_data = {
.segment_reg = aspeed_spi_segment_reg,
};

+static const struct aspeed_spi_data ast2400_spi_data = {
+ .max_cs = 1,
+ .hastype = false,
+ .we0 = 0,
+ .ctl0 = 0x04,
+ /* No segment registers */
+};
+
static const struct aspeed_spi_data ast2500_fmc_data = {
.max_cs = 3,
.hastype = true,
@@ -860,6 +890,7 @@ static const struct aspeed_spi_data ast2600_spi_data = {

static const struct of_device_id aspeed_spi_matches[] = {
{ .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data },
+ { .compatible = "aspeed,ast2400-spi", .data = &ast2400_spi_data },
{ .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data },
{ .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data },
{ .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data },
--
2.35.1