Re: [PATCH v4 0/4] mainline Protonic PRTT1x boards

From: Alexandre TORGUE
Date: Mon May 02 2022 - 04:41:28 EST


Hi Oleksij

On 4/26/22 09:35, Oleksij Rempel wrote:
changes v4:
- reorder prtt1X compatible again
- remove spaces in stm32mp151a-prtt1c.dts

changes v3:
- add silabs,wfx compatible
- move spi pin configuration to stm32mp15-pinctrl.dtsi
- move prtt1X compatible in alphabetical order
- add watchdog and thermal nodes

changes v2:
- cleanup mmc nodes
- disabled dma for uart4 (this is console interface and it should work
as simple as possible)

Oleksij Rempel (4):
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
boards
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
ARM: dts: stm32: add support for Protonic PRTT1x boards

.../devicetree/bindings/arm/stm32/stm32.yaml | 8 +
.../staging/net/wireless/silabs,wfx.yaml | 1 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +
arch/arm/boot/dts/stm32mp151a-prtt1a.dts | 52 +++
arch/arm/boot/dts/stm32mp151a-prtt1c.dts | 304 ++++++++++++++++++
arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi | 229 +++++++++++++
arch/arm/boot/dts/stm32mp151a-prtt1s.dts | 63 ++++
8 files changed, 675 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts


Series applied on stm32-next.

Regards
Alex